How was it for you?

Description

A place where folks who have tried the HAH can leave feedback on their experience

I can't remember how I found out about these boxes. I was probably looking for the CC bridge but I'm glad I did.

Box arrived on Wednesday (well I had to pick it up from local parcel depot) and the missus became a HAH widow :)

Followed the instructions as best I could as I'm on a mac. I did boot into bootcamp to do the initial 'repair' but all the other work was carried out on the mac with terminal and Filezilla.

I must do  a write up for anyone else going down that route.

I now have 11 feeds to pachube (cosm), internal relay/RF board on order and a roomnode from JeeLAbs on it's way too.

 

Just one question... To use a roomnode, do I need 2 nodes (one for base and one remote) or will a roomnode work with the internal RF module? I couldn't quite figure that out from the descriptions.

If I need 2 then I presume I can add a USB hub so I can use the base unit and still use the Current Cost

 

Thanks for yet another ongoing project to add to my php/mysql work, mac app writing etc etc etc

Hi,

Can anyone post and let me know how much disk space they are seeing under 'normal' running? My Livebox fell over yesterday for some reason. I have checked disk space and am currently seeing -

# df -h
Filesystem                Size      Used Available Use% Mounted on
/dev/root                12.8M     12.8M         0 100% /
tmpfs                   256.0k     24.0k    232.0k   9% /var
/dev/mtdblock2          640.0k    268.0k    372.0k  42% /mnt/jffs2/jffs2_3
#

Something doesn't appear to be quite right here with '/' showing as 100% used...?

Are there any log files that need clearing out that anyone can suggest?

Andy

Started with buying a Wannadoo branded router that would just not take any firmware downgrades in order to then telnet into it.  So I then bought a branded Orange one and that flashed first time [also bought another Orange one, thanks G7].

I also managed to get hold of an Envi and will keep my eye out for the EnviR.  So staretd with my electricity usage and onboard temp feeding to Pachube.

Then decided on the PCB kit too [thanks Derek] and after a nice peaceful Saturday morning soldering, finally managed to get the thing built.  I only had one problem though.  I could not work out where to inject the 15v supply onto the board and all the pics on the wiki indicate it was a pad over near the JP1 pads but this was an older version of the PCB.  As I had the newer PCB I posted a question on here and Boxing Orange came to my help and posted a pic to indicate where the new solder pad was.  It's here

/sites/default/files/u29/hahpcb.jpg

Not sure if it may be worth updating the section on the 15v Feed section.

Well it's all up and running, feeding the usage, temps etc and I also went and bought the Lidl sockets and have then switxhing on and off but they do seem to fail after a while though and a reboot of the HAH needs to be done in order to get the RF sending the signal again.  Seems a bit flaky though as when i try and toggle more than one, only one will switch.

I have two questions though: -

Do I need to increase the bursts of the codes in order to get more than one switching at once?

I would also like to change the webserver port the HAH is listening on from 80 as I have some port forwarding on my router already and when I try and add it conflicts.  Is there some sort of Klone websever config file buried somewhere I can change would I have to re-compile it.  Ive looked in the /etc folder but cannot see anything obvious.

Thanks again for all the help so far.

Si

Just thought I'd share with you my Hah build.  I was getting fed up with the finicky and awkward Orange casing not to mention all the peripheries for Hah and wanted to fit it all  into an existing stack.

Fortunately, there's a box for that.

 

The really usefull box.  I think it's a 4L and looks about the size of an A4 page.  Brett you should still remember what the proper size for a sheet of paper is!  Anyway, the 4L provides enough space to house the boards, a usb controller, a 3way powersupply and associated wiring.

 

Arial view of HAH

 

I used extensive hot glue, tie wraps and cable ties.

HAH Connector Ports

 

But it makes updateing/modifying/fixing hah much easier and it fits into a stack of these I have for other functions like media server, firewall etc.

Side View of 3-way power

 

Somethings didn't quite fit, like the power plug extender, so I had to cut it down to size a little, cover the end with clear perspex and hot glued just for saftey.

Next mod will be to add a reset button on the front and update the display to a double lined screen with backlight.

Hope this give you guys some inspiration.

Cheers

Gary

p.s. I forgot to take a pic with the lid on but you get the idea.

It's been quite a week.

Saturday 22nd October - Stumbled across HAH (via Pachube) and found a Livebox on ebay

Tuesday 25th October - Took delivery of Livebox - but it was a V1.2 mini - try again

Friday 28th October - Took delivery of V1.0

Saturday 29th October - ventured into world of hacking, and after 6 hours got HAH on my Livebox

In all honesty, I think the 5 days delay was good since I read/re-read all the available docs, and avoided some errors.

It only took 6 hours since I run Vista, so forgot to run the FTP server and Re-flasher as Admin - doh!

 

Anyway the docs that exist enabled even me to get up and running, so they can't be that bad.

Now to wait till next payday and order the HAH hardware.

Cheers for all the help you have already provided via the forums and other docs,

DK

Hello.  First post and I was hoping to be well on the way to having a flashed Livebox now but ...

I'm not sure if I am doing something wrong but I have a Wannadoo branded Inventel Livebox on F/W V5.00-rc8L-uk.dwb and it just does not want to take the 5_04_3-uk.dwb (Telnet Exploit version) using the RGWRepair.exe file.

I presume the repair tool will work on the Wannadoo versions of the Livebox.  I have also tried flashing to a version that was on the disc supplied with the router (v5-00-RC5.1-uk.dwb) and that too fails.

I am getting the recovery mode three lights displaying on the router after powering up and can see from the task manager networking TAB there is data flowing to the router and I've estimated the saize to be correct for the size of the firmware file.

I'm on Win XP with no firewall switched on, and have tried with manually setting the IP details to 192.168.1.1 / 192.168.1.2 and 10.0.0.1 / 10.0.0.2 for the router and PC respectivley.

I am not sure what I am doing wrong.  I have also tried inputting the commands in the wireless name field with the current firmware but they fail to pull the telnetd file from the FTP server I have running on the PC.  I have also renamed the file to 'u'.

Any help or pointers would be great ta.

Si

Just a post to say that this is a really useul bit of kit and an equally useful forum.

Having discovered this a couple of weeks ago I managed to pick up a box for 99p plus postage on fleabay. Getting the firmware installed was relatively straight forward by following the wiki. There is a lot to learn and I have spent quite a bit of time trying to get to grips with lua scripts. ( It's a steep learning curve for me). I'm hoping to order the addon pcb kit soon and expand the useability.

 

I have seen lots of talk of the xapflash program which I assume works with any flash enabled device, but I can't for the life of me find out how to download a copy. Any pointers would be welcome.

 

I'm working on a script to post Solar PV data from a current cost meter to PVOutput which would be a really useful addition for me, any help would be gratefully received.

Hello,

First I would like to say I am really glad I've found the HAH project page.  Well documented and presented!  A parts shop on a side where one feels seller is not trying to rip you off ;)

I spotted HAH when was searching for an alternative to CurrentCost Bridge.  Had some experience with Pachube too so HAH .. in many ways is just what I needed plus more!
Bought from Ebay UK an EON energy monitor (CC EnviR rebrand) and a Livebox.  I was so anxious to get it that made 1-st offer on four! items from £ 0.99 to £ 5 and .. and got them all .. (LoL)

Since day before yesterday I have hah up and posting CC data on Patchube.  Also using Plugboard managed to add "house total" load feed.  Bought also CC dev. board set, intention is to add gas and water monitoring.

http://www.pachube.com/feeds/19774

I also have a question: if you have a (gu)estimate - when we will see 328 MC in the shop and HAH parts bundle?

 

Kind regards,

Aivo