Other

Description

Other questions about the HAH platform

Forums

Hi All,

Just wondered if it was at all possible to configure the HAH to take on BST time settings, I am currently running 1hour behind. I've had a quick look on google for a different NTP server but from what I can see, it looks like they are all set at UTC and local time is handled by the firmware, is this correct?.

Does anyone have a solution? I know it's not a big problem, would just make my scripts neater.

Many thanks,

Garry

Forums

Hi, 

I'm new to the Home Automation Hub and I'm very interested in the project - however I have read another thread suggesting that HAH was not compatible with the Home Easy HE109 double sockets... I then read a thread suggesting that this had now been cracked.

Can anyone offer any advise as to whether the HAH can now remotely swith the HE109 sockets and what if any additional hardware is required to do this?

Thanks

Andy

Forums

Hi Brett, Derek

May be stupid question but how do I post any code changes to your SVN repository, and what file extensions / where would you like any code placed so it's not mistaken for your hard work.

Presently I have undertaken a very tiny quick code change of the 328 V2.2 code to display on a 16X2 display and also display the firmware version of the AVR on booting.

Steve

Forums

I've had my livebox running HAH for a week now, logging a 1 wire temp sensor, current cost temp and wattage.. but until last night I have not managed to log any meaningful results from my EnviR on power consumption.

I'm very used to the CC units presently owning 4 (1X classic V2, 1XCC128(Envi) and recently 2X EnviR's) the first pair have logged info in my Homeseer server since the ClassicV2 was available, and with 6 mini sensors without issue.

Now to the two EnviR's I recently purchased via ebay as upgrades, the first came with a white USB adaptor the second came with a Black USB adaptor.

As I had yet to connect these to my Homeseer system I plucked one from it's box along with it's white USB lead and linked it up to my Livebox and got immediate temp readings but sporadic peaks of power usage. last night I upgraded to the 328 AVR firmware and during this time got a bit more involved in looking at why I didn't see any power info by looking at the coms over telnet.

Basically some of the XML code was missing periodically missing/corrupt, I had seen that others on this forum have had no issues, so I swapped out the USB lead from the other unit I had purchased, nothing else.....  and now all is logging correctly, temp and power :-)

Just wondering what current cost USB adaptors you guys were using.....

Forums

Hi

Have my livebox running HAH since upgrading both the firmware and adding the hardware to it last weekend and had a great afternoon with a few beers upgrading it :-) and been logging both 1wire temperatures and CCost via pachube.

My goal for your unit is to control (remotely) heating and water of a property I have abroad, major WAF here.

But I was wondering if your AVR code is available as I am interested in modding it, firstly I have fitted a 2X16 blue back lit LCD display for the WAF and also I had one to hand in my workshop, due to the 1X16 code the display is not showing correctly.

I would also like to modify the code to display time and date, plus other scrolling info.

Also in my haste in ordering I didn't stipulate the Homeeasy RF protocol over the lidl protocol... I understand if it’s not and I look forward to release of the Atmega upgraded

Steve

 

 

Forums

Hi,

great work, I am loving playing with this. got mine setup today.

One question though, I would like to view my electricity usage on pachube and have got the data squirting across every sixty secs. however, the pachube historic data only takes a snapshot every 15mins, therefore this gives very skewed data when say the oven only kicks in and out to keep at temp. I would have thought pachube would average individual points for the 15min data point but it does not.

I guess I am asking if anyone else is bothered by this and if there is a way around it, The current cost history dump does contain this data in two hour averages. could this be converted into xAP messages when the currect cost unit does the dump (every two hours or so).

I would rather have total data useage with less resolution than missing large spikes (it is rare for the spike to coincid exactly with pachubes 15min snap shot.

 

any ideas??

many thanks,

 

Garry

Forums

Hi There,

 First off, great project! I've been meaning to do something like this for ages :)

 I've checked out the arduino code, and am playing with the UDPtest demo. Theres a couple of minor problems, firstly the Wprogram.h include in EtherCard.cpp has the incorrect case, needs to be WProgram.h Secondly there some sort of variable scope problem resulting in heartbeats that don't have the source field populated and responses to requests not happening, again caused by the source variable.

 I'm not really a coder, any chance someone could take a look? I've tried the code on versions 18 and 22 of the IDE.

-Thanks again, Max.

Forums

Hi,

Is there a list of RF devices anywhere that I can use?

I thought I saw one, but I have been looking but can't seem to find it.

Thanks

Dan

Forums

Hi,

This post is more for info, as I have been unable to recreate this.

I was playing around with the twitter feature from my phone. Using ubertwitter to post commands to the relays. I did not get any response. I had got responses in the morning but not in the afternoon. 

By response I mean deleting of the command tweet and a tweet from the box, which says "Relay x is off".

When I eventually got home tonight, using the xfx viewer there was no twitter present, in the item list and no heart beat.

I have spent the last while posting various messages and no luck.

If it does happen again, how can I get at information that would be of use to you? Are there any logs etc?

Cheers

 

Dan

Forums

I am looking at connecteing a cc (mains current thingy) a 7110 mobile (i have lead and phone) as well as several other usb bit's n pieces in the future (incl usb mem key).

what i am asking is has anyone used a 2 or 4 way usb to serial converter?

On one of my amateur radio setups i use a 2 way and at work we use a few 4 way's (prolific chipset) my question is has anyone already tried these and if so what are the recommendations etc?

I hate re-inventing the wheel.

 

reason for the cc is i am due to have solar panels installed shortly and want to monitor what they are generating and hopefully if they are powering more than house is using to fire up immersion heater until it balances to zero, lots of planning and hopes for this project :) i like the cc as it can monitor many different sensors.