Other

Description

Other questions about the HAH platform

Forums

Hi all

I've recently joined the HAH community and I'm getting great satisfaction from seeing the stuff work as advertised....  I'm not a Linux/C/XaP/LUA kinda guy - but I can follow detailed instructions...which is what is usually provided...and I've succefully hacked/modded several LiveBox's and have them actively uploading data from my SolarPV array to Pachube feeds (see https://pachube.com/feeds/37125 for my real-time graphs).

However - I'd like to have the capability of viewing all my data from the various Feed:ID's on one graph - this would be far more meaningful, and much easier to interpret - so my question is:

What do I need to do to get the data from several CurrentCost channels onto one graph?

Pachube tell me that they do not provide this service - but they are working on something similar and will have a beta version 'real soon' - possibly!!

I see that HAH provide graphing capability - could it be incorporated there?  Oh! the possibilities!!!!

Thanks for looking at this - I hope someone can come up with something!

Regards

 

EJ

Forums

I'm trying to FTP to the HAH but i'm not able to connect.

Tried user root with p/w admin but cannot connect..

TELNET and SSH do work but not FTP (although this is enabled in admin-services)

Forums

It appears a few people are having problem uploading files.... this should be working.

On the right hand "Site Navigator" there is a link called "My account".  If you click on this you should get a page with a "File Browser" tab that will allow you to upload a file to the site which you can then reference this URL in your posts.

Brett

Forums

A JeeNode can be flashed from the HAH system.  This is in anticipation of getting these into the shop very soon now on a limited basis as our first run was to make sure there where no fabrication errors before doing a larger run of PCB's.

http://www.dbzoo.com/livebox/hah_jeenode?&#flashing_from_the_hah

Although I've not tried it as of writing this it should be possible to flash the .HEX file for the HAH firmware to an arduino directly connected to the HAH system too.... :)

Brett

Forums

Hi All,

I have commented on this issue before but it is getting worse and my previous workaround is now also becoming unreliable, therefore I was wondering if somebody could help me to get to the bottom of the following issue.

I use google calendar to schedule switching my lights on and off. I used to just have an event with the same on/off time to make this happen (and hence one alias message was generated by the HAH) and all was good until a few months back when I noticed that I was missing some events.

This got worse until I was getting hardly any events triggered. To get round this I now schedule 10minute long events to ensure I get 10 attempts at generating the alias message and hence switch my lights either on or off accordingly. (xfx viewer shows I tended to get ~4 messages in any 10min period, ie 40% success rate)

This did get round the issue for a while but now even this does not gurantee the alias message being generated (i.e. sometimes I get no alias messages out of 10 attempts)

I want to use this feature for my heating in the winter but cannot currently rely on Cgal to generate the neccesary events.

Debugging shows the HAH to do the poll every 60 seconds as expected but returns no events from google calendar even when I know there are events present and correctly formatted.

I was therefore wondering if somebody could schedule a 10minute long alias event and monitor the results in xfx viewer to see how many events you get. At least this will let me know if it is an issue with my setup as a starting point.

PS I am currently on release 280 but have had the issue on earlier releases (not that I think the HAH is the issue, I think its Gcal related but nobody else seems to be having any issues!)

Many thanks for reading and any help you can offer

 

Garry

Forums

Can someone advise me where the HOW to for intergrating the Joggler with the HAH has gone?

 

I just got a joggler and would like to use it with my hah. i did find the how to once upon a time but now i want it i cannot find it :(

Forums

I'm actually using official livebox firmware, and installed the usbserial/pl2303 modules with success

my question is : is it possible to change serial port speed ?

> get speed

# stty -F /tmp/ttyUSB0 speed

9600

> set speed to 19200

# stty -F /tmp/ttyUSB0 19200

> get speed

# stty -F /tmp/ttyUSB0 speed

9600

disapointing ...!

can anybody test on the hah firmware ??

Forums

Hi All,

    I was wondering if someone in the know could give me a gentle steer in the right direction. I am on a steep learning curve and a little stuck with this one.

I have found a neat little Iphone app called "mote" that will send UDP/TCP messages and allows you to set up GUI screens and program buttons etc. ( a cheap joggler alternative that will also work outside the house using a host name setup on a dns server was my original aim)
I have managed to get this to send XAP messages to switch on/off RF sockets using an alias style xap message (message is converted to hex so that mote can send it).
This all works well (if a bit unattractive at the moment) and I will post the mote config file later when I have had chance to tidy it a bit in case anyone else is interested.

The bit I would like some help on is regarding Klone. The mote app can also "poll" via tcp,udp and http and display results on the gui. I have used this to poll the /component/statusinfo.kl1 file and display the reported uptime from this, this works no problem.
I would now like to create a new .kl1 file within the same component directory that will return the 1-wire temperatures only, so I can display them easily within  my mote gui.
I think I can find the required code within the index.kl1 page on googecode but cannot work out how to drop a new .kl1 onto the livebox. I cannot find the individual .kl1 files, are they packed away somewhere?.
I feel I may be out of my depth here but any pointers about how to do this or web links to help me learn would be most appreciated.

Thanks again and I will post the fruits of my labour when its a bit tidier and a little less embarrasing ;).

Garry.

 

UPDATE: Forget this. I am being stupid. I can poll the data i require from Pachube.

I'll post results soon. I am rather pleased with it so far. even if I say so myself :)

Forums

Last October  I purchased a WH1080 weather station (or google AKA Watson W8681) from flebay and for around £80 delivered to trial as a replacement of an aging Dallas one wire weather station that's now some 6yrs+ and showing it’s age as we all eventually do.

Today I did a little digging around on this weather station and I believe that it’s main display unit outputs data in an XML format at 19,200 baud, I’ll confirm if this is possible over the next day or so by taking a few XML code dumps and post them here.

So.... I was just wondering would the integration of this weather station in to the HAH livebox be of interest to others?

@ Brett / Derek what is the possibility of this unit being connected at 19,200 baud by the second USB port of the HAH Lvebox and is this possible?, if it is possible and if the interest is there could then could it be intergarted in to a future release?.

Steve