Product archive

Archived product information. Checkout and payments are disabled in this local migration pilot. Listed prices are historical, not current offers.

Legacy SKU
HAH-71
Historical price (GBP)
10.00000

An Airwick iMotion compact unit. This is a great roomNode enclosure. Fitted with PIR and ready to be hacked. No batteries or air freshener cannister - just the base unit. This item is really designed to be sold as part of a 'roomNode bundle' ... priced here to discourage individual sales.

Archived product information. Checkout and payments are disabled in this local migration pilot. Listed prices are historical, not current offers.

Legacy SKU
HAH-52
Historical price (GBP)
9.75000

This is an Arduino board with an RS232 serial connector. Features a six pin ISP connector to allow 168 and 328 chips to be programmed via AVR studio. Barrel connector for external power supply (7.5 to 12VDC). Usual Arduino port pins are exposed. 5V regulator and a 16MHz xtal.

 

Great for programming the HAH Arduino code onto your own AVR chips (no AVR chip supplied with this card).

Archived product information. Checkout and payments are disabled in this local migration pilot. Listed prices are historical, not current offers.

Legacy SKU
HAH-234
Historical price (GBP)
3.00000

This is the microcontroller that is used on the HAH PCB and the HAHNodes. Just the chip, with pins straightened in our anti-static straightener tool.

If you would like either the HAH PCB firmware or the HAHnode firmware flashed onto the device, specify this at ordering (otherwise the chip will be shipped in the virginal state that Atmel supply them - untouched, no bootloader).

The chip will be supplied in the original anti-static tube (well, a cut down version thereof) or in anti-static foam.

To folks that are in urgent need of this device ... please remember that we only ship out (at best) once a week.

Archived product information. Checkout and payments are disabled in this local migration pilot. Listed prices are historical, not current offers.

Legacy SKU
HAH-56
Historical price (GBP)
0.75000

Plastic battery enclosure. Holds 3xAA cells. Sliding lid. Wires attached. Approx dimensions 66mmx45mmx7mm.

Archived product information. Checkout and payments are disabled in this local migration pilot. Listed prices are historical, not current offers.

Legacy SKU
HAH-DB9
Historical price (GBP)
3.65000

Sometimes, it can be difficult to get the wiring of an RS232 connection sorted. This breakout unit has a DB9 female socket that is connected to a 10way terminal block (9+Gnd).

A row of 0.1" molex pins is also available for an alternative hookup.

Four mounting holes in the PCB.

 

 

Archived product information. Checkout and payments are disabled in this local migration pilot. Listed prices are historical, not current offers.

Legacy SKU
HAH-235
Historical price (GBP)
2.40000

The popular DHT11 temperature and humidity sensor. Can be used as a replacement for the DS18B20 part on the HAHnode.

The sensor is mounted on a small PCB. Supplied with three du-pont hookup leads (handy for standalone testing).

Archived product information. Checkout and payments are disabled in this local migration pilot. Listed prices are historical, not current offers.

Legacy SKU
HAH-53
Historical price (GBP)
8.00000

This is a cable that can be used as part of a hookup which connects a Nokia cellphone to your HAH. It terminates in a DB9 female. Just use a cheap USB to serial cable to plug this into your HAH.

See the HAH wiki page at http://www.dbzoo.com/livebox/hah#xap_sms for details on how to use xap-sms to send and receive SMS messages.

Archived product information. Checkout and payments are disabled in this local migration pilot. Listed prices are historical, not current offers.

Legacy SKU
HAH-55
Historical price (GBP)
1.20000

A DS18B20 in a three pin package.

Archived product information. Checkout and payments are disabled in this local migration pilot. Listed prices are historical, not current offers.

Legacy SKU
HAH-ds
Historical price (GBP)
3.00000

This is a 'potted' and waterproof DS18B20. A stainess steel shell covers the DS18B20. The cable is flexible and around 1m long.

Archived product information. Checkout and payments are disabled in this local migration pilot. Listed prices are historical, not current offers.

Legacy SKU
HAH-Er1
Historical price (GBP)
20.00000

The Livebox unit + the HAH addon board is a fine way to deliver a number of 'remote control' capabilities. However, if you just need a small/very low power unit that will connect directly to a CAT5 feed and drive a couple of relays ... the Dbzoo EtherRelay unit is the thing.

We do like to drive down cost - this is possibly the cheapest, ethernet connected, relay controller out there. As if that wasn't good enough, the source code is 'open' and, if you are looking to control via xAP .. it's a 'ZERO config' option.

Supplied pre-built & tested. Delivered as three parts with connecting (four pin female to female) cable assemblies. Description and photo here.

Two firmware options available. The first does DHCP and presents a web UI for relay control. The second also does DHCP, but delivers a xAP compliant relay control capability.

Any questions ... drop a note to the admins.

Archived product information. Checkout and payments are disabled in this local migration pilot. Listed prices are historical, not current offers.

Legacy SKU
HAH-87
Historical price (GBP)
55.00000

 

Some folks mentioned that their soldering skills were a bit limited and found the 161 little solder joints, needed to assemble the board, a bit daunting.

So, this is a pre-soldered & tested board with pre-programmed AVR microcontroller, MMJ socket, RF module, onboard Ds18B20 temperature sensor, 4 relays, terminal connectors for relays/inputs and PCB mounting hardware.

Also, an MMJ to RJ11 cable so it's all ready to plug into your reflashed Livebox.

You might want to add an LCD and an external temperature sensor - these parts are available elsewhere in the Shop.

 

Archived product information. Checkout and payments are disabled in this local migration pilot. Listed prices are historical, not current offers.

Legacy SKU
HAH-66
Historical price (GBP)
30.00000

This is an LCD shield kit. Adds a 8 row by 24 column characher based LCD to your Arduino. Full details of the kit and a link to a YouTube video can be found here http://www.dbzoo.com/atmel/giant_lcd_shield

Archived product information. Checkout and payments are disabled in this local migration pilot. Listed prices are historical, not current offers.

Legacy SKU
HAH-70
Historical price (GBP)
14.00000

A kit of parts to make a baseNode to connect to your HAH. A typical setup has one baseNode and one or more roomNodes.

1x HAHnode PCB
1x AVR microcontroller
1x AVR socket
1x RFM12B transceiver
1x resonator
1x resistor
1x voltage regulator
1x electrolytic capacitor
4x ceramic capacitors
1x ΒΌ wave antenna wire
1x 6way molex pins

Note that the image shows a pre-built baseNode. You are buying a kit of parts. Soldering required.

Build notes are available.

Details at http://www.dbzoo.com/livebox/hah_hahnode#building_your_own

Also note that you may well want to purchase our 'attach cable' to connect this to your HAH, both for programming & for normal operation.

Archived product information. Checkout and payments are disabled in this local migration pilot. Listed prices are historical, not current offers.

Legacy SKU
HAH-2
Historical price (GBP)
7.50000

Microcontroller (Atmel MEGA328P) pre-programmed to operate with the HAH firmware. DIL socket, crystal and caps included. This chip includes support for the new Universal RF capability.

Archived product information. Checkout and payments are disabled in this local migration pilot. Listed prices are historical, not current offers.

Legacy SKU
HAH-BUNDLE
Historical price (GBP)
42.60000

A complete kit ready for assembly.  This contains everything that you need for a fully populated Home Automation Hub (HAH) controller board. A generous discount has been applied to this 'get you started' kit (when compared to buying each part individually). The picture here shows an assembled board - remember that you are buying an unassembled kit ... soldering skills required. Don't forget that, if you want to use this board as part of a complete HAH, you will also need to buy (and reflash) a Livebox router ... or buy one (already re-flashed) from the shop.

Parts include: PCB/AVR micro flashed with HAH firmware/DIL socket for micro/xtal & caps for micro/4x relays and associated parts/4x input terminal connectors/LCD & ribbon cable/IDC connectors for LCD/DS18B20 temperature sensor and attach kit/433MHz RF module, vreg and antenna/RJ11 socket for PCB/MMJ to RJ11 cable/mounting hardware for PCB and LCD/connectors for I2C and 1-wire busses.

Archived product information. Checkout and payments are disabled in this local migration pilot. Listed prices are historical, not current offers.

Legacy SKU
HAH-1
Historical price (GBP)
5.00000

The PCB that holds the HAH microcontroller. Supplied with header pins and resistors for the 1-Wire and I2C bus. A good option if you want to try programming your own microcontroller. 

Archived product information. Checkout and payments are disabled in this local migration pilot. Listed prices are historical, not current offers.

Legacy SKU
HAH-71 / HAH-72
Historical price (GBP)
23.50000
Legacy kit contents
Airwick enclosure (node 475): quantity 1, legacy discount -5.5
HAH roomNode kit (node 476): quantity 1, legacy discount 0

Everything that you need to build a remote sensor unit. Excludes batteries (you need 3xAA cells). Note that your HAH must be fitted with a baseNode in order to receive the signals from your roomNode(s). 

Archived product information. Checkout and payments are disabled in this local migration pilot. Listed prices are historical, not current offers.

Legacy SKU
HAH-72
Historical price (GBP)
19.00000

A kit of parts which adds a wireless temperature sensor and light level sensor. If wired into an Airwick enclosure this also adds motion detection. Needs battery power at 4.5VDC. Again, the Airwick housing has provision for 3xAA cells, so is ideal.

This is a kit. Soldering is required. Note that your HAH will require a baseNode in order to receive the signals from your roomNode(s). 

A full partslist and assembly notes.

Full details of assembly and HAH integration on the wiki
http://www.dbzoo.com/livebox/hah_hahnode/airwick

Archived product information. Checkout and payments are disabled in this local migration pilot. Listed prices are historical, not current offers.

Legacy SKU
HAH-61
Historical price (GBP)
35.00000

 

This is a kit of parts for a unit that will decode the HomeEasy RF protocol. 

Kit includes:

- a microcontroller board (with pre-programmed micro)

- an RF Receiver module

- wiring to connect the RF Receiver module to the microcontroller board

- an antenna connector for the RF module

- an external magmount 433MHz antenna


See here http://www.dbzoo.com/livebox/xap_serial#home_easy_receiver for details of the HE parts that it works with. Note that this kit is also available in a BBSB variant - leave a note at the checkout if you would like the BBSB version.

You need to supply an unregulated (9-12Volt) DC adaptor. The serial output is exposed on a DB9 female connector. If you want to hook this up to a HAH, a  DB9 to USB adaptor /content/usb-serial-adaptor is the thing to use.

Archived product information. Checkout and payments are disabled in this local migration pilot. Listed prices are historical, not current offers.

Legacy SKU
HAH-10
Historical price (GBP)
7.50000

Attaches to the HAH PCB and shows the IP address allocated to the HAH. Complete with mounting nuts/bolts, contrast adjusting trimpot, ribbon cable, female IDC header and pins for PCB. Soldering required to assemble the cable. Be sure to check these notes re howto wire this LCD - not terribly obvious if you haven't done one before. http://www.dbzoo.com/atmel/lcd_assembly