Product archive

Archived product information. Checkout and payments are disabled in this local migration pilot. Listed prices are historical, not current offers.

Legacy SKU
HAH-101
Historical price (GBP)
0.00000

The Livebox case is held together by four torx T10 screws. Some boxes have these nipped up pretty tightly and it can be awkward to find an ordinary screwdriver that will fit. 

Note that you aren't buying this screwdriver, just borrowing it. Post it back to us once you have got your Livebox opened up. Only available for sending out with a Livebox from the shop.

Archived product information. Checkout and payments are disabled in this local migration pilot. Listed prices are historical, not current offers.

Legacy SKU
HAH-57
Historical price (GBP)
8.25000

This is a USB connection/programming cable which is compatible with the HAH and HAH Nodes. Standard Arduino style six way 0.1" pinout.

This connects the HAH to your 'master' HAH baseNode.  It may also be used to power a HAHnode from a USB power supply.

Approx length is 175cm

Archived product information. Checkout and payments are disabled in this local migration pilot. Listed prices are historical, not current offers.

Legacy SKU
USB-miniB
Historical price (GBP)
3.50000

USB Mini-B Adapter, ideal for testing and experimenting. Each connection point is brought out onto a six way, screwdown, terminal block. Option to fit a six way molex connector (not supplied). Also an option to fit an LED/resistor (not supplied).

Vbus, D-, D+, IO, GND and Shield connections are all available. Legend on PCB makes for easy identification of connections. Great for connecting your development boards or controllers to a USB cable. 

If you want to see the type of USB plug that fits this part, visit http://upload.wikimedia.org/wikipedia/commons/d/d6/Usb_connectors.JPG - it's the third connector from the left.

Board size is approx 41 x 25mm. Board has four, pre-drilled, mounting holes.

Archived product information. Checkout and payments are disabled in this local migration pilot. Listed prices are historical, not current offers.

Legacy SKU
HAH-79
Historical price (GBP)
5.00000

A USB to serial adaptor. USB B connector at one end and a male DB9 at the other. The HAH firmware has built in driver support for this device, so you just need to plug it in to get going.

Needs a USB A to B cable (not supplied) to attach to the HAH.

Archived product information. Checkout and payments are disabled in this local migration pilot. Listed prices are historical, not current offers.

Legacy SKU
ftdi_1
Historical price (GBP)
4.50000

This is a USB to serial adapter and a six way female to female cable.

Jumper selectable for 5V or 3.3V output. Ships jumpered for 5V use. Chipset is the popular FTDI FT232RL.

USB power has over current protection, using a 500mA, self-restore, fuse.
Two surface mounted green LEDs flash to indicate Tx and Rx activity

A red surface mounted LED indicates power from USB.

Pinout of six way, 0.1" connector is that used by the HAHnode: DTR,RXD,TX,VCC,CTS,GND.

The USB connector on this unit is a mini B. 

Supplied with a six way female to female cable. Handy for connecting this module to a HAHnode.

You need to add your own USB to micro B cable (and HAHnode!).

Archived product information. Checkout and payments are disabled in this local migration pilot. Listed prices are historical, not current offers.

Legacy SKU
HAH-Vreg1
Historical price (GBP)
0.20000

A linear regulator. Positive 5V part. Packaged as TO-220FP. Made by ST Microelectronics.