Product archive

Archived product information. Checkout and payments are disabled in this local migration pilot. Listed prices are historical, not current offers.

Legacy SKU
HAH-18
Historical price (GBP)
18.50000

Serial console cable for the Livebox. Great to help with initial firmware replacement on the Livebox. Also handy if you wish to use the Livebox as an embedded Linux platform. Comes with a Cisco RJ45 to DB9 cable and a MMJ to RJ11 to hookup to the Livebox. Supplied pre-built and tested.

Just plug in the MMJ plug into the connector on your Livebox & set your terminal emulator to run at 115200 baud.

Archived product information. Checkout and payments are disabled in this local migration pilot. Listed prices are historical, not current offers.

Legacy SKU
HAH-11
Historical price (GBP)
14.95000

Serial console cable for the Livebox. Great to help with initial firmware replacement on the Livebox. Also handy if you wish to use the Livebox as an embedded Linux platform. Comes with a Cisco RJ45 to Db9 cable and a MMJ to RJ11 to hookup to the Livebox. Supplied as a kit of parts for you to solder up (the RJ11 to MMJ cable is pre-built).

Just plug in the MMJ plug into the connector on your Livebox & set your terminal emulator to run at 115200 baud.

Archived product information. Checkout and payments are disabled in this local migration pilot. Listed prices are historical, not current offers.

Legacy SKU
HAH-19
Historical price (GBP)
10.00000

The standard HAH RF antenna is a simple length of wire. This is a nicely made magmount antenna that gives rather better performance. Tuned for use at 433MHz.

Unit is 15.5cm tall and the base is 3cm wide. Cable length is approx 150cm.

The good thing about having a decent cable length is that you can experiment with antenna positioning without moving the HAH unit.

Supplied with a pre-fitted SMA connector. Also supplied is a chassis mounting 'pigtail' socket that you can solder to the RF Tx PCB module. 

Archived product information. Checkout and payments are disabled in this local migration pilot. Listed prices are historical, not current offers.

Legacy SKU
HAH-14
Historical price (GBP)
10.00000

You send one half of your Livebox case to us. We mill the necessary aperture for the LCD. We then send the milled case back to you

Archived product information. Checkout and payments are disabled in this local migration pilot. Listed prices are historical, not current offers.

Legacy SKU
HAH-3
Historical price (GBP)
4.90000

Connects the Livebox to the HAH PCB. MMJ connector (6P6C) at one end and an RJ12 at the other. A six way cable does the connecting. It takes us quite a while to assemble this cable. Also, the MMJ connectors are rare (and expensive). MMJ crimp tools even moreso!

Standard length is around 22cm. If you order this part, that's what you will receive. If you would like a 'custom' length (longer or shorter), or perhaps a MMJ to MMJ cable, be sure to first drop a note to admin@homeautomationhub.com and we can negotiate a price.

Archived product information. Checkout and payments are disabled in this local migration pilot. Listed prices are historical, not current offers.

Legacy SKU
HAH-5
Historical price (GBP)
1.20000

A short RJ45 patch cable. Connects the HAH to your internet router

Archived product information. Checkout and payments are disabled in this local migration pilot. Listed prices are historical, not current offers.

Legacy SKU
HAH-14
Historical price (GBP)
1.60000

Pillars and screws to mount your PCB inside your Livebox

Archived product information. Checkout and payments are disabled in this local migration pilot. Listed prices are historical, not current offers.

Legacy SKU
HAH-51
Historical price (GBP)
4.60000

This item is an addon pack for the PPE baord. It adds one PPE chip to your existing PCB. Pack contains the PPE chip (PCF8574N), a socket for the chip, 3off 3pin molex parts, 3 jumpers and a 2x8pin molex I/O connector.

Of course, you must solder these onto your PPE board.

Archived product information. Checkout and payments are disabled in this local migration pilot. Listed prices are historical, not current offers.

Legacy SKU
HAH-50
Historical price (GBP)
12.50000

This is an addon PCB that can be used as an extension to the main HAH PCB. Kit comprises the PPE PCB and all parts needed to populate this PCB with one PPE (PCF8574N) chip. If you want more than one chip, simply order as many of the 'add a chip' parts as you require (max 4 PPE chips per PPE PCB).

Note that soldering is required ... you are buying a kit of parts. The image shows a finished board.

You can read more about this board on the HAH wiki page

Archived product information. Checkout and payments are disabled in this local migration pilot. Listed prices are historical, not current offers.

Legacy SKU
HAH-15
Historical price (GBP)
30.00000

If you don't want to buy your own Livebox & reflash it, we can supply a 'ready to go' reflashed Livebox. Branded with the Wanadoo logo. Comes complete with a PSU. Easy to get started, just connect this to your router with your Cat5 Ethernet cable and power-up. You get the reflashed Livebox and a PSU. If you need other hardware addons, these are available elsewhere in this shop. N.B. Due to demand (and a severe lack of spare time), leadtime on this item is generally 2 weeks.

Archived product information. Checkout and payments are disabled in this local migration pilot. Listed prices are historical, not current offers.

Legacy SKU
HAH-155
Historical price (GBP)
35.00000

If you don't want to buy your own Livebox & reflash it, we can supply a 'ready to go' reflashed Livebox including the LCD aperture and mounting holes ready milled. You get the reflashed Livebox and a PSU. If you need other hardware addons, these are available elsewhere in this shop. N.B. Due to demand, leadtime on this item is currently 2 weeks.

Archived product information. Checkout and payments are disabled in this local migration pilot. Listed prices are historical, not current offers.

Legacy SKU
HAH-7
Historical price (GBP)
2.50000

Fits to the HAH PCB. One relay + protection diode, driver transistor, resistor and terminal connector blocks included. A maximum of four relays can be fitted to the PCB

Archived product information. Checkout and payments are disabled in this local migration pilot. Listed prices are historical, not current offers.

Legacy SKU
HAH-12
Historical price (GBP)
9.00000

Lidl brand. Controllable by an RF enabled HAH. Note: RF enablement requires the addition of the HAH PCB to your reflashed Livebox.

Archived product information. Checkout and payments are disabled in this local migration pilot. Listed prices are historical, not current offers.

Legacy SKU
HAH-5
Historical price (GBP)
5.00000

Fits to the HAH PCB to allow control of RF mains sockets. Includes voltage regulator, mounting socket and pre-tuned (433MHz) aerial

Archived product information. Checkout and payments are disabled in this local migration pilot. Listed prices are historical, not current offers.

Legacy SKU
RFM12
Historical price (GBP)
5.00000

An RFM12B transceiver module. Manufactured by HopeRF. Operating frequency is 868MHz. Full part number is RFM12B-868S1P. As supplied with the HAHnode and roomNode kits.

Archived product information. Checkout and payments are disabled in this local migration pilot. Listed prices are historical, not current offers.

Legacy SKU
HAH-4
Historical price (GBP)
1.00000

Fits to PCB to allow connection to the Livebox. Includes zenner diode and resistor

Archived product information. Checkout and payments are disabled in this local migration pilot. Listed prices are historical, not current offers.

Legacy SKU
HAH-86
Historical price (GBP)
3.85000

If you need to run a long 1-wire bus, it's better to use CAT5 cabling. This adaptor allows you to easily connect the 1-wire bus on the HAH PCB to your CAT5 cable run. Standard RJ45 socket, a row of 8x0.1" molex pins and a set of 8 screw-down terminal blocks. Four pre-drilled mounting holes. 

Archived product information. Checkout and payments are disabled in this local migration pilot. Listed prices are historical, not current offers.

Legacy SKU
HAH-12
Historical price (GBP)
2.00000

A temperature sensor (DS18b20) ready for mounting in a 3.5mm jack plug. Jack plug and DS18b20 supplied for you to solder up.

Archived product information. Checkout and payments are disabled in this local migration pilot. Listed prices are historical, not current offers.

Legacy SKU
HAH-13
Historical price (GBP)
3.20000

PCB pins, cable with Molex header and panel mounting 3.5mm jack socket. All ready for you to solder up (as per instructions on the Wiki).

Archived product information. Checkout and payments are disabled in this local migration pilot. Listed prices are historical, not current offers.

Legacy SKU
HAH-9
Historical price (GBP)
0.20000

Fit to PCB. The two way connector allows one switch input to be attached. Up to 4 input connectors can be populated on the PCB.