Hardware

Description

Building / testing and troubleshooting the HAH hardware.

Forums

I have nearly finished building the PCB and just need to know where to solder the 15v wire.  I can see on several pics on this page

http://www.dbzoo.com/livebox/hah

and in particular this picture  

http://www.dbzoo.com/_detail/livebox/temp_1wire.jpg?id=livebox%3Ahah

that the red lead is soldered to a pad that is not on my, newer, PCB board.  I can also see that Voltage Reg is an LM78L12 12v one and can find the pinouts on one of those chinese websites that have all the data, but I am seeing conflicting information and rather than take a chance and possibly blow something I thought I'd ask here.

Thanks for any info.

Forums

I have been asked what are they good for by a few people heres some suggestions of how to get started.

 

To start playing go to maplins and purchase YR60Q (2xaa battery holder) ne19v (pp3 battery clip) and a couple of aa batteries.

 

Connect to board + and -.

 

Pair with cc to an unused channel.

 

When you short the input terminals  it displays 500W on the currentcost meter. Great for testing!

 

Uses

 

Being able to tell when intruder alarm is set/unset (connection via relay)

 

On a solar meter there is a red light you can use a light dependant resistor and potentiometer and "detect" when light is solid no solar generation!! This is my next "project" (and I will document)

 

Reverse on main meter to detect if solar is enougth to feed house and grid-in other words get wife to do more washing :)

 

Imagination is the key.

 

What I want to be able to do is instead of the cc diplaying 500w (or rather my joggler displaying 500W) would be nice if it changed colour from green to red or similar for my grid sensor, so I can tell if I am drawing or giving to grid.

 

Dean

 

P.s there is stuff on internet about connecting a pot and seeing varying levels (its even videoed) I have never got this to work and suspect it was an earlier revision board.

 

Forums

Hi,

as already asked in another topic (under firmware),
I would be pleased if somebody could give advice to me how to correct the original RF-codes for optimal usage on the new firmware.

I use the home and easy codes as described on the homepage for the RF 1, 2, 5, 6 and 7, just modifying the last hex digit.
Example ON-Code: 010201130A7301130113011304C9011300000C0127104219A6599A59A59A6659A5A666599A65A5B0

As i am in Austria i can't buy home and easy devices, but i found that my intertechno self learning devices (www.intertechno.at) perfectly worked with that codes on the old firmware.

For the RF 3 and 4 codes have been created with the RF-codehelper also provided on the homepage.
Example ON-Code: 01010177046504650177060127101914141500

This devices are not self learning but have the same possibilities to setup like the bye bye standby device shown on the homepage. Again this worked perfectly with the old firmware!

Thanks for your help how to modify my codes!

 

Markus from Austria

Forums

A quick question about USB drives. When I insert and mount a USB stick I can effectively read and write data but when I unmount it the LED on the stick doesn't go out, so when I remove the stick the USB port is not re-initialised when I try to re-insert it. So the only way I can get the box to read the stick again is by doing a reboot. Is there a way to unmount it so that I don't have to reboot  every time?

Forums

Just treated wife to four of these :)

 

she was rather suprized until i took one into workshop then i got the "what are you planning now" phrase. after explanation i got the "more gadgets"

 

anyway on sale at B&M homestores and the range..

 

go on treat the wife

Forums

Hi,

I would like to use the HAH as a replacement for my current setup but i guess i can't do without help..

Currently i have some solar panels on my roof and i'm monitoring the generated power as well as the total comsumed power at home. Beside these two i'm also monitoring the consumed gas.
The electrical power is measued with two DIN-rail kWh meters outputting one pulse every watt/hour.
Gas usage is measured with an optically from the last digit of the gas meter (last digit has mirror in the "0")
Pulses from these three devices are captured by a "powerlogger" which is actually an atmel avr (which was designed and built by a friend). This powerlogger stores every two minutes the counted pulses in eeprom together with a timestamp (coming from a RTC within the powerlogger).
This powerlogger is able to operate stand-alone, logged data can be retrieved from the built-in LCD display. Its also provided with a serial port (rs232) to be able to retrieve the data on a pc.
I'm currently reading the daily totals every night with a thin-client, which is storing the data is a mysql database on a diskstation (nas) on my network at home.
I created a website displaying this data (see http://johnlast.nl/energie/ ) and also historical data can be displayed here (http://johnlast.nl/energie/history.php) sorry for the dutch language....

Now i would like to use the HAH as a replacement for the powerlogger and the thin client but i don't know if the inputs from the HAH can detect the pulses from the kWh-meters (typically 30 ms).
Next i would like to know how to modify the inputs from monitoring states into counting pulses.

Any help would be very much appreciated!

 

 

Hi Brett,

I am currently looking at the fuctionality of the output node and how it is works as I have a few ideas for it. I have read the wiki but as far as I can see there is no guidance on how the outputs would be switched. I assume it is by sending a xap message to xap serial.

Is this correct? If so, can you please give an example of the format that would be used?

 

Cheers,

Garry

Brett/Derek,

just noted the updated wiki with respect to IR decoding on the jeenode. Good work! i can think of a few uses already!.

just wondering if the future may hold ir transmission too or is this not feasable.

My mind is already planning some sort of home cinema automation with mood lighting control!!!

shmbo aint gonna be pleased :)

 

Garry

Forums

Well My eleccy meter has an LED that flashes when power is being drawn off grid and goes steady red when i am feeding power onto grid.

 

i wanted to know which way round the power was going?

 

so i devised many a circuit that would count pulses etc, then i remembered i had a current cost development board so had a little play with a std cheap light dependant resistor and a 100K potentiometer and low and behold i could get it to output to the current cost.

 

shows 500watts when feeding grid and 0 when drawing.

 

 

pachube feed here (needs to update for a while before it will show me feeding grid as its getting dark and wife's cooking)

https://pachube.com/feeds/15114

 

Forums

Hi,

I have recently upgraded my 1wire network from 3 devices to 7. The 1wire devices themselves have been great and perfectly stable however, they stop my RF from working.

If I disconnect the 4 new devices and reboot with 3, RF is then fine again.

To get round this I have to reboot with 3 devices in place first then connect the 4 new ones whilst the HAH is up and running. I then reset the 1wire bus from the web GUI and I then have all 7 devices and RF working together, this has now been running fine for 2days plus so is stable.

Why should extending the 1wire stop RF from working and how come I can get round it by plugging the extra devices in after startup?

 

any ideas?

 

thanks,

 

Garry.