Hardware

Description

Building / testing and troubleshooting the HAH hardware.

Forums

Having problems with my new HAH !  I have managed to buy a livebox of ebay and get up and running loading my current cost output onto pachube & over to pvouput, next step was to purchase the PCB kit but managed to pick up a second hand box with PCB already assembled last week which I now have working as per my original box but I cant get the LCD to work.  The PCB has been built very neatly (probably better than my soldering would have been !), all I get on the LCD is 8 solid block's and adjusting the trim pot has no effect.  The display on the virtual LCD is fine and I have also carefully checked the LCD wiring for correct orientation and have checked the continuity with a DVM all seem fine !  Have also checked power on the PCB to the LCD connector, pin 2 having 5v & 5v to the trim pot.

 

Can anyone give me any tips on what to try next ?

 

I havnt checked any other functionality on the board, thought I should start with the LCD first !

 

Dave

Forums

Hi, I've been following the forum for a few days now and have a few dumb questions to get started.

1. Which versions of the livebox can actually be used? I know one of the comments from last year talked about V1.1. Is this the only version or can any be used? None of the eBay buyers talk about version numbers and it's not clear to me how they could tell. Is there a part no on the bottom or something?

2. My assumption is to control wireless mains sockets that you need a livebox, the HAH parts bundle and a couple of RF mains sockets. Is anything else needed? (brain and soldering iron excepted)

3. My intention is to do simple things at first, one is to control my VMWare server and broadband connection when they occasionally crash requiring a full power reset. This always happens when I'm abroad and have no access to the physical device. I'd expect to put a simple RF controller next to the server. I also want to control lighting as well.

The ultimate goal would be to get the central heating working with more finesses than at the moment as well as the home security system. 

Any help and suggestions welcomed, All the best, Rob

Forums

All,

I have just been able to get my HAH up and running after all the parts sleeping in their boxes for a week or so.

Anyhow, as I am so new to this (and the forums did not seem to provide an answer I thought I'd enter my first post.

My HAH has the 306 build.

I have my LCD working, my RF module seems to be working wonderfully, and I am controlling 7 BBSB4AW's that had been relegated to the parts draw, and I am also controlling 3 LWRF switches. I have tried both the wall plates (I have quite a few) and the pluging sockets, but currently only have 3 plugin sockets being controlled by the HAH. Will move my others when I feel happy (I'll then have a LWRF wifi-link for sale).

My onboard Ds18b20 seems to be reporting normally, and pachube is being sent the readings.

Now, I built my offboard ds18b20 onto a 3.5mm stereo jack and thought I'd test it, so plugged it in, and after resetting the bus, I get no more unassigned ROMID's. I rebooted HAH and then also did a bus reset, stil nothing.

Then I sat back and thought - did I err by pushing in my 3.5 jack into the connector whilst the HAH was running - did I damage anything?

My onboard is still functioning. 

Also the MB 1wire connector has an 4k7 innplace @ R7, do I need another R on the DQ/Vcc legs on the jack? - I have since tried with both, but still no unassigned ROMID.

I had a quick look at /var/log/* but nothing stands out, infact 'mesages' seems the most verbose logfile.

Can anyone give any tips, or suggest diagnostics. Especially the correlation between the onboard working and the possibility of damage by runtime insertion of the offboard sensor?

btw: I am no engineer (in the electrical sense), although I can solder a little, and have a very basic understanding of how electrons move about - so anything that involves complicated o'scopes and multimeters is a little ahead of me ;).

I'll get a few more ds18b20's in a few days, but in the mean time, can anyone help diagnose my problems?

 

 

 

 

 

 

 

 

 

 

 

Forums

We are updating the Joggler between 30th April and 4th May with a new, larger set of apps and new look. You’ll now get great services like YouTube, Facebook, Google Maps, and many more. At the same time, we’ll be removing the O2 apps.

 

We are doing this so that we can focus on bring new, more innovative services to market.

 

Will this impact our HAH on jogglers at all?

 

http://service.o2.co.uk/IQ/SRVS/CGI-BIN/WEBCGI.EXE?New,Kb=Companion,Pro…

 

Forums

Can someone clear something up for me with regards the pull up resistors on the temp sensors.

Do I need to use 1 pull up resistor per sensor IC, or is it just 1 pull up resistor for the whole array?

Forums

Due to multiple lock ups where laivebox loses connectivity to the HAH i am looking at implementing a soloution of 2 HAH units.

1 for RF (essential)

and 1 for everything else 1 wire currentcost posting to pachube etc.

Now my question is 2 fold i know i have to set the mac address different and the "instance" needs to change.

 

My question is how can i get joggler to work Rf on 1 box and display current cost, inputs and operate relays from the other box?

I assume i only need 1 iserver running, how would i pull this together?

Dean

Forums

Hi Derek,

This looks of interest - however one question does it support the decoding of BBSB - i'm thinking specifically of the Homeeasy Timer remotes (the ones with the LCD - cant recall the part number - could be HE200?) - the wiki makes reference to two versions of firmware.

Thanks

David

Forums

I have moved my HAH due to multiple lock ups that i suspect rf/mains interferance from an adjacent shower pump.

 

now my 1 wire sensors are 30+ metres away the only way i can get them to work is to reduce the resistor value right down to 2k35 (2X4k7 in parrallel as i didnt want to unsolder the board one)

 

 

noe this is working (reliability to be determined) has anyone "played" with the resistor value and anyone know what the min value "could Be"  just thinking if i add more on  alonger run can i reduce resistor value further?

 

P.S i have read somewhere that laddering the one wires is better than star configuration, anyone got a comment?

Forums

 

sensor 4 is reliable, 1/2/3 seems to go haywire, is this due to them being significantly different? sensor4 is brand new 1/2/3 are 12 months old

 

[1wire]
devices=4
timeout=30
temp_unit=C
sensor1.label=Feed To HWT
sensor2.label=Hot Water Tank
sensor3.label=Outside Temp

sensor4.label=HAH PCB/BOX

sensor1.romid=28AFC7F5020000AA28


sensor2.romid=2879E4F50200006A28
sensor3.romid=28CDCBF50200002628
sensor4.romid=281D529C0300000E

 

 

 

 

 

 

Feed To HWT

85.0°C
Hot Water Tank58.6°C
Outside Temp85.0°C
HAH PCB/BOX29.0°C
Forums

 

 

I seem to be suffering with lock ups due to high power switching.

 

I use seperate PSU for HAH and relay after relay's (HAH relays power seperate mains 12v relays on a seperate PSU) they are switching quite high loads circa 750W-2KW on the same spur as the HAH is powerd and i noticed that the LCD goes Booting 3.4 (but that both hah and pcb keep working). But saying that sometimes it locks up and only a full power off/on resolves this.

 

the symptoms are the livebox loses the HAH pcb and this becomes apparant after a software reboot 304/1.0 as oppossed to 304/3.4

 

This happens on 2 totally diffo bit of hardware, 2 liveboxes 2 psu's 2 hah pcb's.

 

Tommorrow i am going to run a sepearate supply and i have purchased some transit suppressors (purchased is not the right word, found in my junk box would be better)

 

Has anyone else who switches high loads noticed this?

 

Dean

 

P.S Super HAH is coming :)

http://www.packetradio.co.uk/gallery/index.php/HAH/IMG_1107

 

See http://www.packetradio.co.uk/gallery/index.php/HAH/IMG_1107