Hardware

Description

Building / testing and troubleshooting the HAH hardware.

Forums

Thanks to Derek I now have the hub all working and can see the IP address from my desktop.

I'm trying to get the RF receivers working and I think I'm missing some simple step somewhere.

I have the LIDLRF sockets as supplied by Derek.

I think the setup is:

  1. Goto the Home Automation Webpage -> Automation Tab and then to Configure
  2. I enter the On string "01020320028A05DC028A05DC0514032004B00C029C401515B155561600" in the RF1 section and the Off String "01020320028A05DC028A05DC0514032004B00C029C4015CB1555555540" in the Off section.
  3. I turn the mains RF receiver on and I hold down Teach-In Button on the RF socket and save my settings.

If this is the sequence it doesn;t seem to do anything for me.

I have also gone to the Control tab, selected the RF 1 checkbox, held the Teach In Button, selected the Action On in the pulldown and "turned it on" according to the control panel.

I didn't think I needed to actually script anything to turn the RF receivers on.

have I been dense and misssed an obvious step?

Thanks,

Rob

Forums

I'm trying to mount a USB memory stick for extra storage. I see th estick when inserted and can see it under dmesg but can't mount it. I've looked at the wili http://www.dbzoo.com/livebox/development#usb_filesystem_support but when I try commands like

insmod vfat.o

I get ....
insmod: can't insert 'vfat.o': Operation not permitted


I guess I'm missing something...

I'm looking at this from a mac based knowledge of unix (yes I can use terminal to a degree)
Half of the commands that I am used to don't exist....

Do I have to build a new firmware to include USB support?
From the wiki I would say no but so confused at the moment.
I guess I have filled my head with stuff and bits are leaking.

Maybe I should take a rest :) I work on industrial electronics all day then come home and play
with this stuff. I must be mad, or will be soon :)

Forums

OK I'm new so I expect I will be asking lots of dumb questions. So here is my first.

 

Is there a guide anywhere to what the 5 lights on the top of the box are for / represent?

Forums

My hardware board occassionally freezes.

Is there a way I can detect if the board is still communication with the Livebox via the webgui.?

Currently I either keep refreshing the webgui page to see if there are changes in the temperature readings (currently running with 7 sensors), or I reset the 1-wire bus to confirm that the temperature sensors are still reporting.

If the board does freeze I need to power cycle the livebox to recover.

Forums

Now I have the HAH board working (and thanks to all the people who helped me through that last push yesterday) I turned my head to reassembly and where to mount the LCD. Originally I thought the LCD simply displayed the IP address which is nice but nothing really useful. I now realise the HAH board is far more powerful then this so have rethought about putting the LCD into the case.

It appears from the shop that the inner-case can be milled to form a nice rectangular hole through which the LCD can be mounted. This implies that the outer shell is not used and is discarded. I'm happy to pay Derek to mill the hole out but was interested in what other options peope had dreamt up.

Is this the case (no pun indended)? What have other people done?

Rob.

Forums

Have I missed soemthing...... I've recently set up a HAHub(HAH9) as a clone of my fully working home system Hub(HAH1), and put it onto a remote LAN.... I've tried to remotely access HAH9 and can't get onto it, so I'm using LogMeIn to access a PC on the remote LAN and try and play with HAH9 'locally' - but PuTTy opens up, shows a cursor and halts with no login, whereas WinSCP will open up, Say 'Searching for Host' then 'Connecting to Host' then error out with 'Host not communicating' and I have to abort out... xFx viewer works fine and shows that HAH9 is active but the Pachube instance only refreshes every 2.5 mins not 60 seconds like all the others...CurrentCost ch1, 2 and 3 and total and temp are all picking up data correctly, but nothing is getting through to Pachube!

Any ideas, please!!!

Forums

I've just finished building the microprocessor board.

I got to the end of the instructions and guess what, no power to pin 7 of the CPU socket when compared to pin 8.

I can measure 18V at the input connection (should be be 15V?) but I have no other way to check the board. Whilst I'm not the worlds best solderer, I'm not the worst, I suspect my cat isn't very good.

I've checked the back of the board and can't see any obvious dry joints or crossed connections.

I'm clueless on electronics so haven't the faintest idea what to check next, so any help gratefully received.

On an upside I have got my PIC controlled working on the internet as a web server, the next session is to write an XAP client/server for it.

Thanks,

Rob.

Forums

The Livebox is working really well but when I try to add extra rf devices their status shows as bad endpoint. I tried training a socket regardless but it didn't pick up a signal. Any ideas? Firmware is 287.