Other

Description

Other questions about the HAH platform

Forums

What should my hysteresis setting be in the CurrentCost and Pachube settings to get a full 'real-time' view?

 

On one of my boxes I'm experimenting with clamps but get period of the same value being uploaded. I'd like to understand if this is hysteresis or a box problem?

Forums

I've got most things up and running (Thanks Derek for the quick posting of my kit). All fine except....

 

I don't see any info in the GUI page on local network or using external ip. I'm sure I did once see data there but may have imagined it :)

I've read through the wiki but not gleaned anything. I've had a look through the various files but don't see anything wrong.

Any pointers?

Forums

OK so I just flashed a livebox and its running HAH latest firmware image connected to edf ecomanager. I can see the whole house transmitter values being read through xfx and can upload to Pachube (Cosm) and all works.

When I select the graph (I have only 1) from the GUI it just says "no data available"

Any clues anyone?

Martin

Forums

Hi everyone. I'm new here, this is my first post!

I recently purchased 2 Hahs on eBay and have been experimenting with them over the last couple of weeks. 

Ive had a few issues uploading data from my currentcost reliably, but I'm thinking more and more this is an ISP Issue (BT) .

 

I have a question about pachube / cosm, is there a simple way to get a total for a feed for a day? I'm uploading PV generation data to feed 7216, and would like to be able to get the total for the day. (pvoutput.org is also collecting it) also, I'm thinking of giving one of the Hahs to a relation to they can see their consumption data, but they will want to know the total for a day...

Forums

Just wondering if someone can offer some help on wether obtaining a log file from crontab is possible. I infrequently get crontab dying and cannot link it to anything obvious. 

I have read about modifying the syslog.conf file but this doesn't seem to exist on HAH.

Is this possible?

 

Thanks

Garry 

Forums

Hi,

I have just found this site, very interesting.

My question is will the Orange Livebox work with a Virgin Media cable connection, or will I have to go down a different route for any home automation connection.

Any info on this greatly appreciated.

Fredco.

Forums

Hi,

I was working through some ideas about connecting different types of nodes together via XAP. I looked at the specification for XAP and realised that the concept of authentication of nodes didn't seem to exist.

As far as I can see nodes exist on a network and there is nothing to stop another 'rogue' node being introduced and causing mayhem, havoc or damage. e.g. they could switch lights on and off, send SMS's and generally make life a pain.

The spec for XAP appears to go back to 2002 when people were possibly more benign, fast forward to 2012 and I would say that my assumption now is that any network will be hacked into just for the hell of it. Turning your lights on and off could be amusing for a script kiddie. The fact that most script kiddies don't know XAP is not a solution, Ignorance and obfuscation are not adequate defences against intrustion. 

Has anyone given any thought to this? Have I misssed something in my reading of the protocols? 

The hacked Livebox supports SSH and SCP (AFAIK) so we have part of the security equation. I haven't looked more closely at the components that make up the Livebox firmware changes to see if they could assist node authentication. Somebody with more experience can comment on this.

The reason I ask is that I'm looking at connecting things that have value into the network and authenticating that a node is what is says it is is important, spoofing looks easy, so how can we tell when we have a rogue element in our network?

Thoughts and arguments welcomed.

Rob

Forums

With a solution to intergarting the WH1080 not seeming to be a simple plug and play task....

I got thinking, my house in the UK is ran by homeseer, mainlobby, with an rfxcom ethernet transceiver along with a number of Oregon Scientific temp and humidity sensors to give me room temps etc.

I know Oregon sell a number of weather station solutions too so I bought a WMR80.................. so now how easy would it be to provide a solution for the HAH, well a quick bit of googling provided a jeelabs link which gave the main code providing hex data via the arduino here and protocols:

http://jeelabs.net/projects/11/wiki/Decoding_the_Oregon_Scientific_V2_p…

http://www.altelectronics.co.uk/wp-content/uploads/2011/05/OregonScient…

A bit more searching found some code which should of decoded this into meaningfull results, but didn't out of the box, but after a couple of evenings of re-coding I had it providing temperatures, Hygro, windspeed, direction, rainfall etc. the pde has some issues and needs some work, all I have done is fix the code and added some new sensors, so all credit goes to those who wrote and shared it first.

Does any one have a OWL energy monitor?, as this code has also been provided, not tested so know doubt will need a bit of rework also.

I have attached the arduino code for you to try, modify and share, next step is to write a lua script to parse the data for the HAH.

note:

Added a .txt extension to be able to attach the file so Just delete the .txt file extension

Hope this is of interest

Forums

Guys/Brett,

I have just built my HAH (306 build), and have been playing. When I got around to googlecal I was up and runing right away.

Then, I noticed that the GUI was reporting date/time @ UTC, so I went ahead and changed /etc/TZ to GMT0BST-1 as we are now in BST (i will add the changeover dates/times later and retest). This fixed my time in the O/S and GUI and my HAH now reports the UK date/time.

Anyhow - my googlecal stopped working (as it should have worked).

I think I traced it back to the xap-googlecal calling the gcal service with the following date format params:YYYY-MM-DDThh:mm:ssZ where Z is obviously zulu time - UTC. This effectively means that the xap-googlecal is looking ahead 1 hour in google (from the HAH's perspective).

Should the param be of the following format?:

YYYY-MM-DDThh:mm:ss+01:00  (using the GMT/BST offset)

i.e ditch the Z and opt for offset from GMT

Date offsets are a pandora's box, and I have yet to look at any of the hah code in google, so I may be barking up wrong tree.

What do you think?

NB:If I rerun the commands from my python shell to mimic xap-googlecal using the offset method I get the correct data returned.

--andy

Forums

I can only get 10 feeds working anyone else have or had this problem?

 

Dean