I could be seeing the same, only yesterday did I go over 10 feeds by adding an out door temp sensor, and since then I have lost my CCost temp sensor.... https://pachube.com/feeds/22210
Yep missed that... 0-11 makes 12 so proves no limit
Still I can't understand why the CCost Temp's not updating, XFX shows the data feed, and the pachube feed is correct, ini file reflects it... I'll keep diggin.
Not sure but could it may be to do with KeyXX=text, where text on on an input.state is the value to display / send. looking in XFX viewer an output.state has a displaytext
Member for
15 years 8 monthsI could be seeing the same,
I could be seeing the same, only yesterday did I go over 10 feeds by adding an out door temp sensor, and since then I have lost my CCost temp sensor.... https://pachube.com/feeds/22210
Steve
Member for
16 years 10 monthsSteve I see 12 feeds there
Steve I see 12 feeds there 0-11 makes 12 on this URL https://pachube.com/feeds/22210
There is certainly no restriction on the HAH that I can think of (intentionally that is).
Brett
Member for
15 years 8 monthsHi BrettYep missed that...
Hi Brett
Yep missed that... 0-11 makes 12 so proves no limit
Still I can't understand why the CCost Temp's not updating, XFX shows the data feed, and the pachube feed is correct, ini file reflects it... I'll keep diggin.
May be Dean can en lighten us on his issue.
Member for
15 years 10 monthshttps://pachube.com/feeds/151
https://pachube.com/feeds/15114
Cannot figure out why, may re do pachube from start heres my ini file (well the pachube section)
feedid=15114
id0=0
tag0=house
source0=dbzoo.livebox.CurrentCost:ch.1
class0=xAPBSC.event
section0=input.state
key0=text
id1=1
tag1=solar
source1=dbzoo.livebox.CurrentCost:sensor.1
class1=xAPBSC.event
section1=input.state
key1=text
id2=2
tag2=grid
source2=dbzoo.livebox.CurrentCost:sensor.2
class2=xAPBSC.event
section2=input.state
key2=text
id3=3
tag3=cctemp
source3=dbzoo.livebox.CurrentCost:temp
class3=xAPBSC.event
section3=input.state
key3=text
id4=4
tag4=HWT Feed
source4=dbzoo.livebox.Controller:1wire.1
class4=xAPBSC.event
section4=input.state
key4=text
id5=5
tag5=Hot Water Tank
source5=dbzoo.livebox.Controller:1wire.2
class5=xAPBSC.event
section5=input.state
key5=text
id6=6
tag6=Outside Temp
source6=dbzoo.livebox.Controller:1wire.3
class6=xAPBSC.event
section6=input.state
key6=text
id7=7
tag7=light1
source7=dbzoo.livebox.CurrentCost:sensor.8
class7=xAPBSC.event
section7=input.state
key7=text
id8=8
tag8=solar1
source8=dbzoo.livebox.CurrentCost:sensor.4
class8=xAPBSC.event
section8=input.state
key8=text
id9=9
tag9=grid1
source9=dbzoo.livebox.CurrentCost:sensor.3
class9=xAPBSC.event
section9=input.state
key9=text
id10=10
tag10=Immersion
source10=dbzoo.livebox.CurrentCost:sensor.6
class10=xAPBSC.event
section10=input.state
key10=text
id11=11
tag11=ALArm
source11=dbzoo.livebox.Controller:input.2
class11=xAPBSC.event
section11=input.state
key11=text
ufreq=10
count=14
feed0=
min0=
max0=
unit0=
feed1=
min1=
max1=
unit1=
feed2=
min2=
max2=
unit2=
feed3=
min3=
max3=
unit3=
feed4=
min4=
max4=
unit4=
feed5=
min5=
max5=
unit5=
feed6=
min6=
max6=
unit6=
feed7=
min7=
max7=
unit7=
feed8=
min8=
max8=
unit8=
feed9=
min9=
max9=
unit9=
feed10=
min10=
max10=
unit10=
feed11=
min11=
max11=
unit11=
feed12=
id12=12
tag12=imersion1
min12=
max12=
unit12=
source12=dbzoo.livebox.Controller:relay.1
class12=xAPBSC.event
section12=output.state
key12=text
feed13=
id13=13
tag13=immersion2
min13=
max13=
unit13=
source13=dbzoo.livebox.Controller:relay.3
class13=xAPBSC.event
section13=output.state
key13=text
feed14=
id14=
tag14=
min14=
max14=
unit14=
source14=
class14=
section14=
key14=
Member for
15 years 8 monthsNot sure but could it may be
Not sure but could it may be to do with KeyXX=text, where text on on an input.state is the value to display / send. looking in XFX viewer an output.state has a displaytext
Steve
Member for
15 years 7 monthsYes that's probably it
Dean, try changing the key values to "state" for relays/rf/inputs At least it works that way for me Cheers Garry
Member for
15 years 10 monthsPerfect
Sometimes you cannot see the wood for the trees :)