Firmware

Description

Issues around flashing livebox firmware HAH or Orange ready for jail breaking.

Forums

I've downloaded the latest SVN update, but when I try to make the code I get an error with the Lua component, see below.

make[1]: Entering directory `/home/karl/livebox-hah-read-only/userapps/opensource/lua-5.1.4'
cd src && make linux
make[2]: Entering directory `/home/karl/livebox-hah-read-
only/userapps/opensource/lua-5.1.4/src'
make all MYCFLAGS=-DLUA_USE_LINUX MYLIBS="-Wl,-E -ldl -lreadline -lhistory -lncurses"
make[3]: Entering directory `/home/karl/livebox-hah-read-
only/userapps/opensource/lua-5.1.4/src'
mips-uclibc-gcc -o lua  lua.o liblua.a -lm -Wl,-E -ldl -lreadline -lhistory -lncurses
/opt/toolchains/bin/../lib/
gcc-lib/mips-linux/3.2.2/../../../../mips-linux/bin/ld: cannot find -lncurses
collect2: ld returned 1 exit status
make[3]: *** [lua] Error 1
make[3]: Leaving directory `/home/karl/livebox-hah-read-
only/userapps/opensource/lua-5.1.4/src'
make[2]: *** [linux] Error 2
make[2]: Leaving directory `/home/karl/livebox-hah-read-
only/userapps/opensource/lua-5.1.4/src'
make[1]: *** [linux] Error 2
make[1]: Leaving directory `/home/karl/livebox-hah-read-
only/userapps/opensource/lua-5.1.4'

 

I've checked that I've got ncurses installed, and I have.  I've also updated all installed linux packages, and running the svn update command tell me that I'm at revision 233.

Any ideas anyone?

 

Karl

Forums

Hi,

 

I saw your update about the Arduino boot loader. Does this mean we can develope code in the arduino ide for the avr in HAH?

Does it replace the original firmware or sit along side it?

Cheers

 

Dan

Forums

I'm new to Livebox/HAH so hope my question isn't too stupid...

I've replaced the Redboot loader OK and think the next stage is to get the hah-firmware.dwb onto the Livebox (as I don't plan on assembling my own firmware)

As I don't have ready access to a Linux machine I've installed TFTP server onto Windows and am trying to translate the instructions here into Windows speak - http://www.dbzoo.com/livebox/firmware

The instructions say to "setup the linkage to the firmware" - what is meant by this?  Is the factory_script_crypt just a link to the hah-firmware.dwb file or do I need something else?

Any help much appreciated!

 

James.

Forums

Hi Brett,

Would it be a big job to expand HAHs xap with the xap-audio schema?

Specifically for the plugboard and allowing it to interact with audio devices or have I misunderstood and it already can?  I have tried to create xap-audio messages but they don't seem to work.

 

Loving all the updates, great work.

Gary

Forums

Trying to use xap-snoop -h at the hash prompt after telneting in.

Keep getting following message:

     /usr/bin/xap-snoop: line 1: syntax error: "<" unexpected

Any ideas?

Also running xfx viewer on the pc into the router I see nothing - suspect I am doing something daft here.

 

Apart from that great fun.  Got googlecals, twitter, plugboard (demos), etc working.  Waiting for SMS cable.

Current cost feed can be seen at http://www.pachube.com/feeds/13194

 

What a great project - have bought two more liveboxes as xmas presents for others to play.

 

Kim 

Forums

I just updated to 254 and now all my I/O shows 'could not connect'. 

RF, relay, input, temp, and LCD.  (LCD does display IP)

I've tried rebooting several times and got it back very briefly once for a few secs but then it went again... is this just a coincident hardware fail with the update or could it be a firmware issue ?

  K

Forums

Hi Guys,

As you know I do most of my controlling HAH through my Joggler and xapflash.

Now upto 253 I pretty much had a basic config working no problem, controlling devices and picking up info.

After upgrading I had to obviously change all the uids in xapflash to point to the new xap devices.

Now the buttons don't work or rather they do work but when I press a button on I get an immediate off to match it.

If it's on and I press it I get an off and an immediate on so effectively the buttong doesn't work.

 

Any ideas?  Should I re-learn the rf devices perhaps?

 

Cheers

Gary

Forums

Hi Derek,

Just flashing my 2nd HAH.  Get all the way to replacing the bootloader, no problem.  I then flash the hah firmware, connect the system to my network, restart and watch for the new IP grabbed from DHCP.

The system doesn't seem to pick one up.

I have removed the bluetooth circuit, would that make a difference?

I've tried it in both network sockets still nothing.

 

I get LED 1 quickflash

LED 2 occasional blink.

It didn't work first time round, so I went back, downgraded the Livebox to 5.04(again) and started from there.  I get to the same place and the same result.  After flashing HAH firmware, I reboot and it doesn't pick up an IP from my network.

I've tested the DHCP connection with laptop and it picks up IP instantly.

Any ideas? Am I doing something daft?

Forums

 

Hi ,

I'm looking at extending hah to support Comfort (Security/Automation System). I have successfully got the xap-comfort service running and would now like to integrate this into new web pages served by klone. I'd like to be able to set/get alarm status, get/set inputs, set X.10 etc.

With the exiting architecture, what is the best way of talking to other xap processes from klone? It seems the registry is used for this purpose today? I'm not aware that any of the existing pages directly display xap msgs? If this is done today, please point me in the right direction!

Finally, thanks go out to the developer(s) to such a fantastically well documented and architected system. 

Cheers,

steve

 

Forums

Hi,

I used instructions from this side: http://www.dbzoo.com/livebox/hah

so I:

1. Downgrade the Livebox (5.04 -uk)
2. Gain command line access
3. Replace the Redboot loader - I checked with fconfig if it's work and till this moment everything is right.
4. Flash the HAH firmware onto the Livebox - After this step my Inventel wasn't work (only two LEDs flashed but I can't connect it with PC) and I had to reflash it to normal firmware. I used Release 246 - R31 and 252 -76 witg same result...

any ideas??

 

DZ