Firmware

Description

Issues around flashing livebox firmware HAH or Orange ready for jail breaking.

Forums

Evening all. I wonder if you can help. I have 2 units I bought from one of you guys on here some time back. I use them only to upload PV data to pachube / cosm / xively. They have been working fine until the 17th April when they stopped.

 

I bought the units already flashed and they are still running 306. Having a poke around I think the reason they have stopped uploading is that the api.pachube.com URL have finally been switched off?

 I thought the easiest way to 'fix' this would be to simply update to the latest firmware. I can log in to the boxes with putty and find my way around to look at and modify basic stuff, but Ive had a look at the pages on here but I'm out of my depth if I'm honest.

As the boxes are already 'cracked' and running which of the steps do I really need to do to get from (306) to the latest firmware version (317?)?

All help gratefuly received!

Forums

Don't know if anyone else has had problems recently with xively postings but I've had a couple of instances recently of the xively posting just stopping.

This is the output from my xap-xively.log this evening:

# cat /var/log/xap-xively.log

Xively Connector for xAP v12
Copyright (C) DBzoo 2009-2013

[err][pachulib.c:101:resolve_host] errno 22 (Invalid argument)
[err][pachulib.c:101:resolve_host] Err!! gethostbyname
[err][pachulib.c:101:resolve_host] errno 22 (Invalid argument)
[err][pachulib#

I don't know if this is a problem with the system of with my inputs.

Any pointers would be welcome.

 

Allan

 

 

Forums

Hi I have just updated to firmware 313 and have lost my config. When I tried to restore it says it was succesful yet the config is still missing.

I would like to rollback to 311 as it had all the functions I needed.

How do I rollback?

Thansks,

Lawrence

Forums

Forgive me if this has already been covered, I looked through the postings and can't find anything about it.

I decided to bite the bullet and update to the 311.11 Beta so that I could use twitter again. All went reasonably smoothly and /etc/xap.d was populated as expected. I moved xap-livebox.ini. Having rebooted the box I discovered that the plugboard was not running.  I didn't realise, but figured out, that the plugboard.lua file from /etc_ro_fs had to be copied into /etc/plugboard in order for the plugboard to work with the new settings.

 

Hope this helps if anyone else encounters this.

 

 

Forums

Hi Brett,

When i enable Plugboard under Assists the baud rate / port settings are displayed, shouldnt this be reserved to enabling the serial schema option only?

thanks

Andrew

Forums

First of all a free admission that I don't have a clue what I'm doing with this, but as a few
people have decided to build firmware to run on the Raspi I thought I might have a go and see
what happened.

I created a VM running Ubuntu 10.04 and had a go at installing the necessary bits to make it
suitable for compiling the firmware.

I made some progress but the "make -f Makefile.bone" always ends with the following error:

make -C src/posix -f rex_posix.mak

make[2]: Entering directory `/home/allan/livebox-hah-read-only/userapps/opensource/lrexlib-2.4.0/src/posix'

ld -o rex_posix.so.2.4 -shared lposix.o ../common.o

lposix.o: In function `generate_error':

lposix.c:(.text+0x1e5f): undefined reference to `__stack_chk_fail_local'

ld: rex_posix.so.2.4: hidden symbol `__stack_chk_fail_local' isn't defined

ld: final link failed: Nonrepresentable section on output

make[2]: *** [rex_posix.so] Error 1
make[2]: Leaving directory `/home/allan/livebox-hah-read-only/userapps/opensource/lrexlib-2.4.0/src/posix'

make[1]: *** [build_posix] Error 2

make[1]: Leaving directory `/home/allan/livebox-hah-read-only/userapps/opensource/lrexlib-2.4.0'
make: *** [lrexlib] Error 2

which i, obviously don't really understand.



I've tried several different approaches using different OS's but to no avail.

I wondered if it was because I needed the "Invertel Source and Precompiles Toolchain"
so I decided to have a go at installing that as well.

I've downloaded the http://www.dbzoo.com/public/OPENSOURCE-5G-2006-07-18.tgz 3 or 4 times
but while it says that 333MB has been downloaded, it never seems to complete correctly and I always get a 240-270 MB corrupt archive.

So 2 questions
1) Do I need this to make it work?
2) Has anyone else had trouble with the archive being corrupt?

Forums

I have just down loaded the latest Beta version 311.3/3.4 and have made the following observation.

1                     Backup does not appear to be available.

2                     Automation Control Panel labels shows RF 1, Relay 1, Input 1, Sensor 1 etc, not user named labels, This is ok in the admin information panel.

3                     One of my RF codes 01010177046504650177060127101910101500 was transferred to the new ini as 1.0101770465046e+36, the off code was similar.

Apologise if any of these have been flagged already.

 

On a side note are there any plans to re implement GoogleCalendar.

Forums

Hello,

 

Was trying to upgrade today, still running 306 with the old pachube.

But i cant login via SSH.

Tried everything:
root/admin
root/password
root/
admin/root
admin/
admin/password
Root/admin
Admin/root

What else can i try? is there a way to reset the SSH password?

Cant remember i ever changed it.

Forums

Is there any way to make a permanent change to /etc/init.d/syslogd (it seems to be on the read only file system) ?

I want to change the destination to my syslog server (rather than default 192.168.1.254), so I know the change that is needed is to add -L -R 192.168.1.1.

 

Thanks

Forums

Hi all,

 

after a bit of a break from all things HAH I have starting reworking the way my house and smoke alarms are integrated and hence have been attempting to use xap-twitter to post notifications of events. 

It seems that xap-twitter is working but very sporadically. Control via a tweet or attempts to send a tweet only work about 2in10.

the log shows a regular error about not e ought tokens to parse.

 

Embedded below is my debug log

 

 

[inf][tcurl.c:277:getLatestTweet] Response from TWITTER '[{"created_at":"Sat Aug 17 18:04:24 +0000 2013","id":368795461169078272,"id_str":"368795461169078272","text":"House tweet @gazdwil testing","source":"\u003ca href=\"http:\/\/www.apple.com\" rel=\"nofollow\"\u003eiOS\u003c\/a\u003e","truncated":false,"in_reply_to_status_id":null,"in_reply_to_status_id_str":null,"in_reply_to_user_id":null,"in_reply_to_user_id_str":null,"in_reply_to_screen_name":null,"user":{"id":275045394,"id_str":"275045394"},"geo":null,"coordinates":null,"place":null,"contributors":null,"retweet_count":0,"favorite_count":0,"entities":{"hashtags":[],"symbols":[],"urls":[],"user_mentions":[{"screen_name":"gazdwil","name":"Garry Williams","id":255691665,"id_str":"255691665","indices":[12,20]}]},"favorited":false,"retweeted":false,"lang":"en"}]'
[inf][tcurl.c:278:getLatestTweet] [{"created_at":"Sat Aug 17 18:04:24 +0000 2013","id":368795461169078272,"id_str":"368795461169078272","text":"House tweet @gazdwil testing","source":"\u003ca href=\"http:\/\/www.apple.com\" rel=\"nofollow\"\u003eiOS\u003c\/a\u003e","truncated":false,"in_reply_to_status_id":null,"in_reply_to_status_id_str":null,"in_reply_to_user_id":null,"in_reply_to_user_id_str":null,"in_reply_to_screen_name":null,"user":{"id":275045394,"id_str":"275045394"},"geo":null,"coordinates":null,"place":null,"contributors":null,"retweet_count":0,"favorite_count":0,"entities":{"hashtags":[],"symbols":[],"urls":[],"user_mentions":[{"screen_name":"gazdwil","name":"Garry Williams","id":255691665,"id_str":"255691665","indices":[12,20]}]},"favorited":false,"retweeted":false,"lang":"en"}]
[err][tcurl.c:292:getLatestTweet] Not enough tokens where provided to parse:
any help much appreciated
thanks
Garry