Trying to use xap-snoop -h at the hash prompt after telneting in.
Keep getting following message:
/usr/bin/xap-snoop: line 1: syntax error: "<" unexpected
Any ideas?
Also running xfx viewer on the pc into the router I see nothing - suspect I am doing something daft here.
Apart from that great fun. Got googlecals, twitter, plugboard (demos), etc working. Waiting for SMS cable.
Current cost feed can be seen at http://www.pachube.com/feeds/13194
Member for
16 years 10 monthsNo I did something daft
That was my fault when I pushed up a firmware build (272?) this program was left compiled for x86_64 instead of cross compiled to MIPs.
I believed I had fixed this what build are you on?
Release 274 was published although not made public, as it just contained a few minor tweaks that one guy was running into, so you can go ahead and update to this revision and it should fix this problem. Using:
# /etc/init.d/update
Brett
Member for
15 years 11 monthsIt says 274 on the top rhs of
It says 274 on the top rhs of the Home Automation Hub webpage. Says update not needed when I did telnet etc.
How do I get xfx working?
Kim
Member for
16 years 10 monthsTwo versions of 274
As 274 wasn't a public release I wasn't anticipating anybody picking up this bug before I fixed it and push up new firmware using the same version number.
To get around this issue you will have to FORCE the update which will pull a new 274.
# /etc/init.d/update force
xFXViewer - If you are using v4 a windows hub is now mandatory. V3 didn't require a hub I still use v3 for this reason.
Member for
15 years 11 monthsAll sorted
Excellent - now snooping and viewing to my heart's content - although I freaked out when V3 first started - flashing black screen until I did an "esc" and allowed it through the firewall.
Thanks for help