URF

Description

Universal RF codes, discussions about the RF subsystem and devices supported.

Forums

Hi, has anyone managed to get these working. I knew dimming might be an issue but thought that simple on off would work, apparently they are compatable with remotes other than HE200 so I assume the HE advanced protocol. Examples on wiki not working, any ideas?

Forums

Hi all,

 

This may be a silly question, or prehaps already asked before so forgive me if so

I sometimes find some of my HE sockets may take a "couple" of transmissions to toggle

i dont think this is the signal strengh as the original RF remote gives the same performance

obviously these sockets dont give any indication to the HAH that they have toggled which would be the icing on the cake (prehaps a hack with a jeenode into each socket could get around this)

for a quick and dirty fix i was wondering if an option could be made in the HAH config to specify a repeat factor with a delay to possibly overcome this issue?

 

Thanks

Andy

Forums

Noticed that the folks at Halx were selling these modules at a discounted price on eBay. Hooked one up yesterday and was pleased to see that they work fine with the BBSB codes from the HAH.

Derek

Forums

Has anyone used or know what codes the HE830S remote sockets use?

They are 3000w resistive load with a SN: SP021205

Forums

Brett / Derek

Not sure if you have seen this on Jeelabs?

http://jeelabs.org/2011/02/03/ook-relay-revisited-2/

http://jeelabs.org/2011/01/29/new-ook-and-dcf-relay/

The RF code is rather cool (as much as I understand it) 

  • there are two pulse sources: the 868 MHz receiver and the 433 MHz receiver
  • for each, a “DecoderInfo” table is defined with decoders to use for them
  • the runPulseDecoders() function does what the name says: evaluate each of the decoders in turn
  • when a decoder succeeds, data is added to an outgoing buffer (and optionally, printed to serial)

Sounds like a chum for URF?

Plus most of the big ones have been written by JCW who really seems to know what he is doing.

 

 

Forums

 

Anyone played with one of these yet?

My idea is wire my door bell to HAH and get it to RF to this device and on other front door (mothers annexe) have the rf doorbell and it only alerts her. hopefully it will take command from 2 remotes else i will be having lots of fun decoding RF

HOME EASY HE306

 

 

 

HOME EASY HE306 - PLUG IN WIRELESS DOORCHIME KIT

BRAND NEW IN PACKAGING - UNUSED

 

ITEM DESCRIPTION

  • 30 METRE RANGE
  • 300W MAX
  • TIMER FUNNCTION
  • COMPATIBLE WITH OTHER HOME EASY PRODUCTS

 

THE HOME EASY PLUG THROUGH DOORCHIME KIT ALLOWS YOU TO HAVE A WIRELESS DOORCHIME AND REMOTE SOCKET COMBINED.  WHEN THE PUSH BUTTON IS PRESSED THE DOORCHIME WILL SOUND AND ACTIVATE THE SOCKET, SWITCHING ON THE APPLIANCE PLUGGED IN.  THIS ITEM CAN ALSO BE CONTROLLED BY ANY HOME EASY TRANSMITTER

Forums

After much arguments with wife i have given in and purchased 6 HE-302 they can be "dual" programmed (well can be linked to 6 remotes) so hah and remote so when HAH does not work wife can still turn light on. Also these do not seem to be impacted by power cut's!

probelm is i am struggling with codes the below all work but i cannot fathom out how to add more?

presently i have 6 devices but if i can get that to 12 i will so I need 13 codes (i use one code as an all off code)

The codes i found that work are below but even using the excellent web rf thingy i cannot get anymore working? these codes are for nexus brand? but work the he-302's i did try some other codes i found but all remotes went on/off

 

rf1.off=010201130A7301130113011304C9011300000C01271042199A59A59A6659A659A5A6665999A5A5B0
rf2.off=010201130A7301130113011304C9011300000C01271042199A59A599A65A6659A5A6665999A5A5B0
rf3.off=010201130A7301130113011304C9011300000C01271042199A59A659A59A6659A5A6665999A5A5B0
rf4.off=010201130A7301130113011304C9011300000C0127104219A6599A59A59A6659A5A6665999A5A5B0
rf5.off=010201130A7301130113011304C9011300000C01271042199A59A59A6659A5A66659A65999A5A5B0
rf1.on=010201130A7301130113011304C9011300000C01271042199A59A59A6659A659A5A666599A65A5B0
rf2.on=010201130A7301130113011304C9011300000C01271042199A59A599A65A6659A5A666599A65A5B0
rf3.on=010201130A7301130113011304C9011300000C01271042199A59A659A59A6659A5A666599A65A5B0
rf4.on=010201130A7301130113011304C9011300000C0127104219A6599A59A59A6659A5A666599A65A5B0
rf5.on=010201130A7301130113011304C9011300000C01271042199A59A59A6659A5A66659A6599A65A5B0