Is anyone using a wireless temperature sensor to monitor their Immersion/cylinder? If so can you share how you've achieved his i.e. what kit is needed?
OK cool thanks will give it a go although the soldering may be a problem for me as I've never done any before! Is there anywhere I can buy already made up versions of these?
But i don't mind knocking you a set up (and programming chips/testing if i have to-ill just copy mine) as long as you are prepared to wait as i still have roomnode to knock up myself (been sitting on bench waiting for a week now-oil tank sensor) and as long as you are willing to pay postage :)
Just get Derek to send parts to me (he has my address) and ask him "nicely" to program chips appropriately-(that way it will make my life a bit easier) ensure you pay the recorded postage as i would hate for us to fall out because of a post offices mistake!
I know you will have to be trusting but i will do it within a couple of weeks of receiveng parts-work keeps getting in the way of having fun :(
I can solder and have certificates somewhere to prove it-I have an HND in electronics and an HNC in tellecommunications and you don't get them unless you can solder.
I also have to ask how far is the HAH from the immersion?
Thanks Dean that’s really good of you to offer this, of course I will pay costs, I will speak with Derek and get back to you, thanks again.
Distance is approx. 5 to 10 meters max my HAH is at the bottom of the stairs in a wooden cupboard and the cylinder is at the top of the stairs pretty much line of sight.
Member for
15 years 10 monthsYes
Jeenode :)
so you need a roomnode and basenode and a temp sensor.
works quite well.
Member for
14 years 7 monthsAre you talking about the
Member for
15 years 10 monthsNo airwick not required
The airwick is just an enclosure with pir etc, not required if you just want temperature :)
AH baseNode kit
Member for
14 years 7 monthsWill this work with just the
Member for
15 years 10 monthsyes
it plugs into the usb-via a hub if you have a cc
you do not need the HAH PCB for this :)
Member for
14 years 7 monthsOK cool thanks will give it a
OK cool thanks will give it a go although the soldering may be a problem for me as I've never done any before! Is there anywhere I can buy already made up versions of these?
Member for
15 years 10 monthsNot that i know of
But i don't mind knocking you a set up (and programming chips/testing if i have to-ill just copy mine) as long as you are prepared to wait as i still have roomnode to knock up myself (been sitting on bench waiting for a week now-oil tank sensor) and as long as you are willing to pay postage :)
Just get Derek to send parts to me (he has my address) and ask him "nicely" to program chips appropriately-(that way it will make my life a bit easier) ensure you pay the recorded postage as i would hate for us to fall out because of a post offices mistake!
I know you will have to be trusting but i will do it within a couple of weeks of receiveng parts-work keeps getting in the way of having fun :(
I can solder and have certificates somewhere to prove it-I have an HND in electronics and an HNC in tellecommunications and you don't get them unless you can solder.
I also have to ask how far is the HAH from the immersion?
Dean
Member for
14 years 7 monthsThanks Dean that’s really
Member for
15 years 10 monthsdone
in the post.
pictures here:- sorry for the quality of the photo's
http://www.packetradio.co.uk/gallery/index.php/HAH?page=2
Dean
Member for
14 years 7 monthsYou star! Thanks a million
You star! Thanks a million for this, all working great!