General discussion

Description

Off piste conversations

Hi everyone who still visits the forum, I have decided to take the plunge and gradually migrate my Home Automation Hub over to Home Assistant, so far I have found some integrations very easy and some what I would consider very simple but quite difficult to set up on HASS. Over the years I have got quite proficient at using “vi” to edit my schedules, HomeAssistant for me feels like a step back when trying to perform simple “cron” changes. Having all the schedules on one page was brilliant even though you had to be very careful with the syntax.

I have just got my rfrx.com device connected to HASS and it has detected nearly all of my 433 mhz devices which is very easy to set up and find Home Easy or other devices.

For my transition to be gradual I would like to try and use my existing JeeNodes amd migrating them over to Home Assistant unfortunately I am really struggling with this, I have read numerous threads but cannot find any real information that explains exactly what to do. Even reading Home Automation Wiki I cannot find what data is sent serially to the 868mhz transmitter and trigger my jeenode rx devices. I will eventually start using ESP8266 devices but would love to get my jeenodes working in the interim as they have been very reliable.

So far I have purchased a number of ESP 8266 devices to experiment with which include a 4 ch relay device with 240v power supply for around £8.00 inc delivery from china, unbelievable!!

Looking forward to hearing anyone’s comments.

 

Kema…

Just thought I'd say hi as it's been over a year since I posted here. HAH still running well. So well that I get into a fluster when it fails :)

I'm sure Brett knows this and probably others too but for those who don't....

To get your system to automatically adjust for BST send the following command

sudo dpkg-reconfigure tzdata

and follow the onscreen instructions to set Europe then London, and hey presto your system will show the correct time in BST in summer, and GMT in winter.

 

I should add that I am using the portable version of HAH, so not sure if it will work with the original Orange boxes.

Things started going a little wacky a few weeks ago. All has run fine for years with minimal issues. But then I noticed the sunrise/sunset was not telling me if it was daylight anymore. Then I lost the roomnode receiver. When I say lost, the serial data stopped displaying in XFX viewer. So I power cycled the HAH. Now the time is out by hours as though it isn't checking with the nntp pool anymore. Maybe it's dropped off the network but no, I can still connect via ethernet.

My DNS address has changed as I have a new broadband router, so I have corrected that via the webserver. 

I have pulled out the three jeenodes (or copies of) and all work individually. Time to see how good my memory is. It's worked so well for so many years, I forgotten more than I care to admit. 

Any suggestions on what to check?

I don't know if anyone else has tried these but I recently obtained a couple of wifi smart plugs from amazon:

https://www.amazon.co.uk/gp/product/B07CVJYV3G

There are quite a few around using various brand names and based on the ESP8266 wifi chip I think. While the RF plugs that I use are generally pretty reliable these give another option and it would seem could be integrated with the HAH using python code from here:

https://github.com/clach04/python-tuya

I've just used a lua app to send data to my raspberry pi which is on the network anyway running the fauxmo.py script for amazon echo integration. There's a bit of an issue regarding having the app open on your phone because the devices can only have one connection at a time but it seems to work on an experimental basis so far.

Just something else which could help to keep this excellent system alive.

Hi,

I was referred to this forum via the website DBZoo for contacting the person behind the Cybiko projects. I am having trouble finding a solution and am trying all possible angles. I have a Cybiko classic and it has been working fine up until recently. It froze and would not turn off so I hit the reset button and the screen went black and then black and white stripes came up but after that there was nothing. I have tried plugging it into the PC and running auto updater and Cyloader but every time it tries to install the CyOS back onto the Cybiko it just pauses and either does nothing or says 'No response from the Cybiko computer please try pushing the reset button'. Doing that only sends the Cybiko back to the black and white stripes screen. Is this now a hardware issue, something is preventing information from reaching a particular chip on the board? Or has this happened before and there's a hack or way around it? I know its been nearly 20 years but in all honesty I still love the Cybiko an would hate to have to relegate it to my non working collection of retro machines and go buy another one for silly money on eBay.

The forums are fairly quiet these days and most HA talk on the web varies around MQTT, NodeRed, Node.JS, Z-wave and OpenHAB

No offence to Brett & Dereks hard work the HAH xAP system works great for me and many others but i struggle to encourage others into it

they tend to head over to OpenHabs site and have a MQTT broker up and running in little or no time

with that said i wonder if we should be looking at keeping up with other technologies to stay along side the game and not behind it.

thanks Andrew

I've just aquired one of these with 3 IAM's but have discovered that no documentation is available. Does anyone still have the instructions for this lying around? Or a pointer to an online version.