Other

Description

Other questions about the HAH platform

Forums

A minor irritation rather than anything greater, but recently when ssh-ing into one of my boxes, there is a delay of about a minute before the login is possible. It's not a major problem but my iPhone webssh app times out before I get to log in, though I can log in from a laptop or desktop on the network.

My other box works fine. I don't know what I've done to make this happen but any suggestions would be welcome.

Forums

Hi All,

I have an odd issue where my xAP messages have all but stopped.

Only when I enable the pluginboard do I get a few heartbeats and then that seems to stop too.

I'm using 314/3.4 on Livebox.  Not sure when this happened as most of my functionality has stopped but I had just decided to get RF plugs and Jogglers backup and running and was trying to debug, when I noticed it.

Both my Jogglers are showing black screens, which I know can be caused by many things, but I when checking iServer, I noticed they weren't even connecting.  I can connect to iServer using telnet.  It was then I thought to check the xFX viewer...and saw nothing.

Anyone else seen this?

Forums

Hi I found a problem when I try to delete a Xively feed on the HAH. I currently have 14 feeds.

Example If you try to delete say your 8th feed. Your last feed is deleted and your 8th feed is renamed to your 9th feed, then you have a duplication of the 9th feed.

I hope this makes sense.

This problem is repeatable.

 

I am running 314 software

Forums

I've decided to have a go at running both my boxes simultaneously on my network to allow me to fiddle with one while letting the other run the heating without causing grief.

I've set the second box with the hostname 'deadbox' and allocated a static ip and changed the mac of eth0 and eth1 on the management page. On the instance page I've changed the UID's of twitter, livebox and plugboard from 00XX to 11XX. I had expected the UID of xap messages from the second box to change to 11XX but this doesn't seem to have happened.

I'm not really sure what to put in the 'HAH Device' box on the instance page, I did try a number but it was just removed when I saved the settings.

The boxes seem to be cohabiting reasonably steadily at the moment is there anything else that I need to do?

Forums

Brett,

Think the bscmsg helper still has an issue. See below:

 bscmsg -t dbzoo.livebox.williams:Thermostat -s on -x 20.5

/usr/bin/lua: /usr/bin/bscmsg:39: attempt to concatenate field 'x' (a boolean value)

stack traceback:

        /usr/bin/bscmsg:39: in main chunk

        [C]: ?

#

 

changing the -x flag in the code to -c and args.c (for example) fixes it, is this cos variable x is used during the on/off state check??

 

Garry

Forums

Does anyone use the sample script for determining sunrise/sunset?

I've installed this script into my plugboard directory to implement sunset light switching as an alternative to the IFTTT + twitter version which I have used up to now.

I've changed the Lat/Long to (roughly) my home location and set it running. I've calculated the sunrise/sunset times and also referenced them from wuderground:

http://www.wunderground.com/cgi-bin/findweather/getForecast?query=55.50…

This gives sunrise /sunset of 7:37am / 5:27 pm which agrees with my calculated times.

The applet returns sunrise /  sunset times of sunrise=08:13:57 sunset=16:59:34 and the web page set to auto gives sunrise=09:13:57 sunset=17:59:34 for Prestwick airport. Neither of these times seems to have any relationship to the actual sunrise and sunset times.

I can, of course, just fiddle the Lat/Long to give a more acceptable answer but ........

Anyone else encountered this problem?

 

Forums

I noticed this when trying to debug the failure of my annual Cron automation of Christmas lights.  I don't think that I've done anything to break it as I rarely go beyond the web interface, but as I'm a complete novice anything's possible...

 

Command line attempts to control RF switch are ignored.  I've tried
bscmsg -t dbzoo.livebox.controller:rf.1 -s on
and
aliasmsg "rf 1 on"

However using the web interface, RF control works just fine.  The bscmsg command (in fact entering bcsmsg 'anything') generates this error message:

bscmsg: onoff is unknown type

  Various flags and option typ
    -t (string)   xAPBSC Targe
    -s (onoff)    xAPBSC State
    -x            xAPBSC Text
    -l            xAPBSC Level

aliasmsg "rf 1 on" returns no error. It does generate an XAP event that I can see with xfx viewer, {text=rf 1 on}, but no RF event.

I've tried rebooting, installing latest f/w, clean install & restore settings.   No joy.

Any suggestions would be gratefully received.

Forums

So, the pneumatic 'press to flush' system on the toilet stopped working. It wasn't the pushbutton part that compresses the air, but the expensive and hugely inaccessible valve affair. Thoughts of plumbers and general inconvenience filled my head with gloom.

Had a look at the broken part - all it did was raise a plastic rod (that presumably just covers the water outlet at the bottom of the cistern). Then I recalled some low voltage solenoids that were stashed in the basement.

A few bits of mounting bracket and some soldering and I have a solenoid activated valve. Works well. 

Solenoid

Next stage is to move the low volts PSU and all wiring to basement. Then an input line on my HAH wired to a little footswitch and one of the, ethernet connected, xAP enabled relays to switch the solenoid.

Have to explain to SWMBO that a network outage will render the toilet unflushable.

All good fun.

Derek.

p.s. Oh yes, I also need to fit a 'safety chain' to the solenoid to prevent it ever falling into the water!

Forums
I would be very grateful if someone could test if Twitter is fully functional. I am getting the message below when I click on the "Authorise with Twitter button".
"Unable to acquire request token from Twitter"
"Acquiring a request token failed"
I have recently made some changes to my HAH and am not sure if these are affecting Twitters operation.
I use HAH Twitter to send me a SMS if my burglar/fire alarm are triggered.
Firmware Build: 311/3.4
Many thanks in advance.
kema
Forums

Not strictly an HAH question but does anyone else have problems with the Current Cost temperature output?

This is my CC temp output for today and not for the first time it fluctuated wildly (playing havoc with the central heating control) until I noticed it and power cycled the unit.

It doesn't happen very frequently but enough to be a minor issue.

Allan