All RF devices need to be decoded before they can be used. I'm not aware that anyone has done that yet. I have a bit of kit that lets you grab the signal from the chip one the remote, once you've identified the correct pins to put the probes on, this make the task relatively easy. How much are they? I've got enough of these things pilled up doing nothing so don't really want to buy any more, but for a few quid I probably get them.
Member for
16 years 5 monthsNeeds Decoding
All RF devices need to be decoded before they can be used. I'm not aware that anyone has done that yet. I have a bit of kit that lets you grab the signal from the chip one the remote, once you've identified the correct pins to put the probes on, this make the task relatively easy. How much are they? I've got enough of these things pilled up doing nothing so don't really want to buy any more, but for a few quid I probably get them.
Karl
Member for
15 years 10 monthsThey are £5 for 3 inc remote-but beed decoded
Decoding has been done i just cant add the bits together, from the wiki
pulsedef=01012C03770377012C
burstcount=12
interburstdelay=9000
frames=25
stream Description
B956BF00 Unit ON
B956B700 Unit OFF
Up to 16 sockets can be supported by altering the hex digit '9' in the above sequence thru '0'..'9' and 'A' .. 'F'.
Dean
Member for
16 years 10 monthsTry the helper
http://www.dbzoo.com/public/rf-helper.html
Member for
15 years 10 monthsBrett you changed it didnt you :)
Tried that 3 times today without joy.
went back to it before throwing a wobble and it bl***dy worked grrr...
Did increase the burstcount to 50 thougth
thanks :)
Member for
16 years 5 monthsTry this...
Unit 9 ON - 0101012C03770377012C0C01232819B956BF00
Unit 9 OFF - 0101012C03770377012C0C01232819B956B700
If that works I'll tell you what I've done so that you can do the rest.
Member for
14 years 10 monthsworked for me!
I Don't know if this worked for the OP, but it worked for me! :) I Just changed the socket ID from 9 to 1,2,3,4 etc
Cheers!
Andy