From the screenshot it looks like you are on a MAC, sorry can't really help you on that platform but its should be a similar process for you favorite SVN client.
In anycase you can't just FLASH this sketch and drop it into a HAH as it'll be the wrong frequency. The Arduino compiles up at 16 Mhz the HAH runs at 7.3728 MHz. You need to correct for this by creating a custom board in the configuration files.
As simplier approach.
If you have an Arduino you can flash new .HEX firmware including the v3.4 firmware directly from the HAH. See some notes http://www.dbzoo.com/livebox/hah_jeenode#flashing_from_the_hah where I did this for jeeNodes. Same deal for the HAH firmware too if you use a 328 chip that already had an Arduino bootloader. Note: The one we ship does not you need an ISP programmer to either a) put back a bootloader or b) flash the HEX directly.
avrdude is currently in the latest beta release, I think this will probably be released more formally when the JeeNodes come on the scene. If you want to upgrade your HAH to Brett's latest beta this command should work :-
/etc_ro_fs/update-dev hah-beta.dbzoo.com
I'd obviously like to add the usual caveats, backup your config file and note this is a beta, so things might be different compared with an official release. Having said that, Brett code is usually very stable.
Member for
17 yearsNot a Sketch
I might be wrong, but this looks like a bunch of HTML, not an Arduino Sketch.
The Sketch is at http://code.google.com/p/livebox-hah/source/browse/trunk/userapps/arduino/liveboxHAH/liveboxHAH.pde
... the first few lines read like this :
#define SDA_PIN 6 // PD.6
Do check your source code.
Derek
Member for
16 years 10 monthsYou'll need more than just a sketch
You will need more than the sketch anyway. I suggest you check out the Arduino branch from the SVN
http://www.dbzoo.com/livebox/hah_arduino#checking_out_from_svn
From the screenshot it looks like you are on a MAC, sorry can't really help you on that platform but its should be a similar process for you favorite SVN client.
In anycase you can't just FLASH this sketch and drop it into a HAH as it'll be the wrong frequency. The Arduino compiles up at 16 Mhz the HAH runs at 7.3728 MHz. You need to correct for this by creating a custom board in the configuration files.
As simplier approach.
If you have an Arduino you can flash new .HEX firmware including the v3.4 firmware directly from the HAH. See some notes http://www.dbzoo.com/livebox/hah_jeenode#flashing_from_the_hah where I did this for jeeNodes. Same deal for the HAH firmware too if you use a 328 chip that already had an Arduino bootloader. Note: The one we ship does not you need an ISP programmer to either a) put back a bootloader or b) flash the HEX directly.
Brett
Member for
15 years 4 monthsflash directly from hah with avrdude
Hi brett,
sorry for this question, but i am just a beginner on the livebox hah system:
Is there any manual for installing the avrdude onto the livebox?
I don't want to make the system unstable!
Thanks for your time,
Markus
Member for
16 years 5 monthsavrdude on the HAH
Hi Markus,
avrdude is currently in the latest beta release, I think this will probably be released more formally when the JeeNodes come on the scene. If you want to upgrade your HAH to Brett's latest beta this command should work :-
/etc_ro_fs/update-dev hah-beta.dbzoo.com
I'd obviously like to add the usual caveats, backup your config file and note this is a beta, so things might be different compared with an official release. Having said that, Brett code is usually very stable.
Hope that helps,
Karl
Member for
15 years 4 monthsflashed .HEX directly with avrdude
Hi Brett,
I flashed a new 328 chip with the Arduino bootloader already on it directly with avrdude.exe as you described for the jeenode.
Everything was working fine and the 328 seems to work perfectly in the livebox.
But to be sure, do I have to change anything on the fuses in this case?
avrdude tells me the following:
Thank you,
Markus
Member for
16 years 10 monthsIf its working then your good to go
If you have flashed the v3.4 AVR firmware and its all working then you are good to go.
Brett