Hi.
With the new avr code release I want to get into flashing my own avr. I need to do this cheaply and don't have an arduino. Anybody got any suggestions on what I'd be best buying? Many thanks
Garry
Well, the newly ported AVR code (from Bascom to Arduino) is looking good. Soak test of URF commands ran last night without any issues. Still some documentation updates to do, but it's getting there.
Note, however, that we still don't have an Arduino bootloader onboard. This hasn't been a priority - getting the code stable & tested is. I just lift the .hex file that the Arduino compiler produces & program that as usual.
I'm not best placed to advise on a decent programmer. For years, I've used the programmer that is included with Bascom. It makes things like getting fuse bit settings correct a breeze. However, it's a commercial product & rather expensive if you just want a programmer.
There are other folks on this forum (esp. Karl) who are flashing their own AVRs with the latest Arduino style HAH code - I'm sure somebody will offer advice.
The posting from Brett reminded me that I had a similar setup lying in store. So, I dug this kit out & did a little writeup as to how it can be used to fuse the (beta) HAH Arduino code. See this wiki page for the info http://www.dbzoo.com/arduino/isp_with_stk500
I've been checking the URF on this Arduino release. All seems good ... however I do see that the pulses on the Arduino code are slightly longer in duration than those of the Bascom. Easy to adjust (after all it is Universal RF). A reduction of 10% in the current pulse lengths should suffice. I plan to update the wiki in due course.
Member for
17 yearsArduino release ... almost there
Well, the newly ported AVR code (from Bascom to Arduino) is looking good. Soak test of URF commands ran last night without any issues. Still some documentation updates to do, but it's getting there.
Note, however, that we still don't have an Arduino bootloader onboard. This hasn't been a priority - getting the code stable & tested is. I just lift the .hex file that the Arduino compiler produces & program that as usual.
I'm not best placed to advise on a decent programmer. For years, I've used the programmer that is included with Bascom. It makes things like getting fuse bit settings correct a breeze. However, it's a commercial product & rather expensive if you just want a programmer.
There are other folks on this forum (esp. Karl) who are flashing their own AVRs with the latest Arduino style HAH code - I'm sure somebody will offer advice.
Derek.
Member for
16 years 10 monthsWhat I use
I use an AVRISP and an Arduino. For the software side of things I use AVR Studio which is free.
Member for
17 yearsAdded some notes & put board up on the shop
The posting from Brett reminded me that I had a similar setup lying in store. So, I dug this kit out & did a little writeup as to how it can be used to fuse the (beta) HAH Arduino code. See this wiki page for the info http://www.dbzoo.com/arduino/isp_with_stk500
Cheers,
Derek.
Member for
15 years 7 monthsSuccess
Hi, just thought i'd do a quick update as I am rather pleased with myself!!!.
I have sucessfully flashed to v3.3 of the AVR firmware and all looks good so far...will now see if URF is more stable..fingers crossed.
In the end I purchased an arduino Duemillanova (spelling?) and a cheap Pololu AVRISP programmer.
AVR studio was used as the software and thanks to Derek's wiki (linked in this thread) all was very straightforward!!.
Thanks again guys for your help and hard work rewriting this firmware.
Garry
Member for
17 yearsGood Job
Nice to see a 'gone well'.
I've been checking the URF on this Arduino release. All seems good ... however I do see that the pulses on the Arduino code are slightly longer in duration than those of the Bascom. Easy to adjust (after all it is Universal RF). A reduction of 10% in the current pulse lengths should suffice. I plan to update the wiki in due course.
Do let us all know how you get on.
Derek.