HAH resetting?

My HAH has reset itself randomly about half a dozen times now I restore from backup and it works fine then just wipes everything again, anyone know what is wrong/how to fix?

Member for

15 years 1 month

allanayr

12 years 7 months ago

I have 2 liveboxes and a raspi running HAH firmware. I'm not aware of any problems like this. Sorry I can't help.

Member for

14 years 5 months

mark_baldwin

12 years 7 months ago

Is it loosing your .ini files when it resets (/etc/xap.d)?

Can you see anything in the logs (/var/log) ?

Member for

17 years

derek

12 years 7 months ago

I generally see uptime until a planned reset. 60 - 90days isn't uncommon. No wiping of config.

How often are you seeing a 'random' reset?

Derek.

Member for

14 years 7 months

DoubleSpeed

12 years 7 months ago

Seems to be resetting itself about every 4 or 5 days however there is no obvious pattern actaully reset itself again in the last few hours so that was twice in a 48 hour period.

After a reset I don't seem to have /var or /etc/xap.d please see the attached screen shots

Attachments
no-var.PNG (1.24 KB)
xap.PNG (6.06 KB)

Member for

17 years

derek

12 years 7 months ago

It might be the case that a catastrophic hardware issue is occasionally wrecking your box.

If this was happening to me, I'd get another Livebox (still under a tenner, delivered) from eBay. Even if this has the same issue, you've at least eliminated one possibility & you can resell the spare box.

Derek.

Member for

14 years 7 months

DoubleSpeed

12 years 7 months ago

Whats the score with Raspberry Pi now I can see a thread does it work with CC also wireless JeeNodes etc would it make sense for me to move?

Member for

14 years 5 months

mark_baldwin

12 years 7 months ago

The PI and BeagleBone systems are still very much in alpha development but funtioning. My BeagleBone has been up and running for a month or so now. 

I'm still using the livebox for RF using the HAH PCB and the roomnode basenode is still connected to that too. The BeagleBone is used for picking up data from the WH1080 weatherstation and the current cost sensors. 

Whether you move over is up to you and how critical the home automation is to you. 

Member for

16 years 10 months

brett

12 years 7 months ago

Make sure your plugboard scripts don't have any debug or print statements in them as this will fill up the /var partition with log output eventually crashing your livebox.   You might want to check the size of your /var/log files after a day, and before a crash, to make sure they are not growing out of control in anyway.

Brett

Member for

14 years 7 months

DoubleSpeed

12 years 7 months ago

Will keep checking my logs, the only thing that I can think of that might be connected is my router/broadband connection has been unstable recently dropping out and needing restarting etc, is there anything on the HAH like additional logging etc that might be triggered by this that may then use up all the memory?