RoomNode LoBat

I would like to push the low battery alert/trigger to Cosm so I have added dbzoo.livebox.jeenode:immersion.lobat | xAPBSC.event | input.state | text | to my HAH Pachube Settings however nothing seems to be pushed to Cosm I was expecting to see an on/off state published?

Member for

15 years 1 month

allanayr

14 years ago

Does it need a state change to fire an update before anything gets sent?

Not sure. Just a thought.

Member for

15 years 11 months

kim

14 years ago

I can't see the lobat defined on Cosm - at the risk of insulting your intelligence you did define the new tag there as well?

Mine is at - 0 for off 1 for on - at least that's what I think it is - never having had a lobat signal.

https://cosm.com/feeds/13194?pachube_redirect=true

Regards

Kim 

Member for

14 years 7 months

DoubleSpeed

14 years ago

Hi Kim, no I haven't set it up in Cosm only because with all the other feeds from HAH they automatically published into Cosm as soon as HAH push data to Cosm, are you saying the lobat needs to be setup differently as it won't do the same as the other feeds from HAH?

Member for

15 years 10 months

g7pkf

14 years ago

They only change/are updated in cosm after a (hysterisis) change.

 

Dean

Member for

14 years 7 months

DoubleSpeed

14 years ago

Is there a way I can send a 'fake' message to simulate at Cosm?

Member for

15 years 11 months

kim

14 years ago

First of all it is interesting that you defined your feeds just by sending data - I had always assumed you had to do it yourself using

console and edit.

Secondly I don't think it is the hysteresis - I think that only applies to the one wire - if I click on the temperature lines on both your and my

feeds I can see lots of times when the data is the same yet a time stamp is recorded.

I HAVE established using the Cosm debug to look at what was actually received, that if you remove the battery to the hahnode everything - including

the "moved" and "lobat" state gets sent.  So maybe that is the solution.  Rebooting the livebox doesn't do it - I have one livebox for the hahnodes

and another doing the upload (my non experimental livebox) - rebooting either doesn't stimulate sending messages for the "state" feeds.

 

Finally the COSM api documentation - under FEEDS - UPDATING A FEED gives information on simulating data posting:

"If your client is unable to make PUT requests, then this can be simulated by a POST request and a "_method=put" parameter, e.g. by POSTing to http://api.cosm.com/v2/feeds/1977?_method=put"

Hope that helps.

Kim