Oregon Scientific Sensors

With a solution to intergarting the WH1080 not seeming to be a simple plug and play task....

I got thinking, my house in the UK is ran by homeseer, mainlobby, with an rfxcom ethernet transceiver along with a number of Oregon Scientific temp and humidity sensors to give me room temps etc.

Member for

15 years 8 months

steve

14 years 7 months ago

Just for info,

I have tryed a few 433Mhz RX, a cheap flebay unit which looks similar to the jeenodes unit is pants only receives data from sensors that are local, a second RFhope unit that was not OOK caompatable, recently sourced a RX-M50RR30SF as used in the original project and have very good reception

 

Below is a screendump of the serial output from the arduino with the reworked code

Member for

17 years

derek

14 years 7 months ago

Thanks for the info ... good job Steve.

That module looks very well constructed. 

I tested a fair few cheaper parts when building the HomeEasy RF Rx unit. If you are up for a test, I could send you one of the modules that I ended up choosing ... so you might compare with the RX-M50RR30SF.

Derek. 

Member for

15 years 8 months

steve

14 years 7 months ago

I'm up for testing, it would be interesting to see what differences in range the units have.

The cheap fleabay unit marked ZABR1-01 range was only a couple of meters, where the Aurel RX-4M50RR30SF has a good 15m + inside still need to confirm the full distance.

Steve