With a solution to intergarting the WH1080 not seeming to be a simple plug and play task....
I got thinking, my house in the UK is ran by homeseer, mainlobby, with an rfxcom ethernet transceiver along with a number of Oregon Scientific temp and humidity sensors to give me room temps etc.
Member for
15 years 8 monthsHardware
Just for info,
I have tryed a few 433Mhz RX, a cheap flebay unit which looks similar to the jeenodes unit is pants only receives data from sensors that are local, a second RFhope unit that was not OOK caompatable, recently sourced a RX-M50RR30SF as used in the original project and have very good reception
Below is a screendump of the serial output from the arduino with the reworked code
Member for
17 yearsNice looking RF Rx module
Thanks for the info ... good job Steve.
That module looks very well constructed.
I tested a fair few cheaper parts when building the HomeEasy RF Rx unit. If you are up for a test, I could send you one of the modules that I ended up choosing ... so you might compare with the RX-M50RR30SF.
Derek.
Member for
15 years 8 monthsRF Rx comparison
I'm up for testing, it would be interesting to see what differences in range the units have.
The cheap fleabay unit marked ZABR1-01 range was only a couple of meters, where the Aurel RX-4M50RR30SF has a good 15m + inside still need to confirm the full distance.
Steve