Long Post....
xAP Intranet applications have for many years been at the core of my Home network. xAPIntranet integrates multiple webservers, which can be on multiple hosts into one entity.
These hosts are windows based, and I know that there is a school of thought which says that windows is not suitable for Home Automation, which I understand, but for me xAPIntranet has always been about information first, any 'control' aspect being secondary or non critical
Member for
15 years 7 monthsThanks.
A nice write up on what xap can do apart from just pure automation, thanks Kevin. One question, what is the hardware requirements for switchboard. I like the caller ID prospect? Cheers Garry
Member for
16 years 5 monthsxAP Switchboard
From James' site mi4.biz
http://www.mi4.biz/modules.php?name=Content&pa=showpage&pid=37
xAP Switchboard
Switchboard logs all incoming and outgoing calls. It maintains it's own address book and matches all calls against this. It looks up the STD for the calls and also can associate an image to a contact. Using the optional Outlook plugin you can use your Outlook address book and it will sync up address lists from as many outlooks as you like. All interaction with this app is done through a fully featured web interface. Also can now monitor and log instant messenger events too. Google maps is used to display callers on either a map or satellite views.
Some time ago I produced a diagram showing some of this stuff fitted together:-
xAP and Telephones
How telephony is integrated with xAP
http://www.mi4.biz/modules.php?name=Content&pa=showpage&pid=58
My own seup is a serial Meteor Caller ID device monitored by the other Kevin's xAPTel telephony app, and then Switchboard
There may well be other hardware interfaces etc, I haven't been keeping track
hth
kevint
Member for
17 yearsCaller Id
Last time I looked at this I found two main approaches. The first was to find a dedicated unit (like the Meteor device mentioned by kevin). These were pretty expensive and hard to find.
The second (and cheaper) was to keep a lookout on eBay for somebody selling an old Hayes 'voicemodem'. If you find the correct model, it can be put into a mode where it spits out the CID info onto its serial port just before the first 'ring' of the incoming call. After that, it's just an exercise for the reader to parse it/do a lookup or whatever and take the desired action on the HAH.
The annoying part of this is that only certain Hayes viocemodems actually work. I'm not at home just now, so can't check which specific model worked for me. I'm sure that google might have more on this topic.
Member for
16 years 5 monthsIf you look at the diagram I
If you look at the diagram I referenced above you will see the Pace Solo modem. This is a very old UK modem and the application is similary old.
I did do some work with homeseer vesrion 1 and scripts with the zoom 3025C internal PCI modem with some success, but it became unreliable, I think as the homeseer host pc was worked harder
Looking at the config drop down of my xAPtel application it says it supports Meteor and Pegasus, from http://www.pathwaydata.co.uk/products/index.php, modem and TAPI.
I purchased my Meteor from ebay, but they are a rare thing there.
I am not sure how far KevinH got with modem support. I know that dial out worked, that there were discussions on the Hayes modems and he also did some work on the Zoom modem, but i don't know how far that went. You would have to ask him. Certainly I know the reliability improved greatly when he swopped from xapax.ocx to xapintranet.ocx
Finding modems that support UK Caller ID have always been a problem
The Linux hosted Asterix system was also popular but I never tried that, you should perhaps ask on the Yahoo groups
kevint