Hardware

Description

Building / testing and troubleshooting the HAH hardware.

Forums

OK - so great fun building the controller board.

Plugged it in and confirmed something was happening by clicking a relay - how exciting is that!

Plugged in the display - nothing - then found I had connected the ribbon cable to the connector the wrong 

way round - can confirm it doesn't blow up display and will work when connected right way round.

Having changed the display on the LCD - "hello world" - more excitement, I now want to talk to the controller

via /dev/ttyS0.  Using the command: "microcom -s 115200 /dev/ttyS0" - nothing happens

I have tried turning off the xap_livebox process since that is using /dev/ttyS0.

Not a linux expert so would welcome help on how to get the magic +++ debug message??

I am accessing using telnet and typing "ls -l /dev/ttyS0" seems to show the port is there.

Still enjoying it - want to get this bit sorted before connecting up the power lead and rf board.

Kim 

p.s If I kill the xap-currentcost process and do a "microcom -s 4800 /dev/ttyUSB0" I get lots of lovely data

Forums

Hi Derek,

Did you manage to get the HomeEasy double wall socket issue resolved.

I think you emailed me something about it but don't see any mention in changes.

Just wondered if it had been implemented in latest releases.

Cheers

Gary

Forums

I found some old temp sensors in the drawer and have tried to use them but I am getting "?" in the text field. They are DS1820 not DS18B20 - is there a significant difference? I have looked at the data sheet but I cannot fathom what the difference is.

The new sensor is at the end of a longish run, although there is only one sensor, so I dont think the length is significant?

Thanks in advance for any thoughts on this

Alan

Forums

A bit of a numpty question, but does anyone know the bit size to open the case?

I have a set of adaptors, but as the screws are way down in a recess, I cant use these, and I dont want to shell out for a whole kit or several wrong size ones.

 

Thanks

 

ALan

Forums

Can anyone suggest the best way to house an outdoor temperature sensor? I may want to add a light sensor at a later date as well.

I have one from the DBZoo shop, temperature-sensor, and was thinking of putting it in a old film case and putting in under the eaves.  Or perhaps just sealing it with hot glue inside the case to protect the legs from corrosion.

Any thought?  I know a few of you have them.

Thanks

 

Karl

Forums

Hi Derek, Brett,

I have a new issue with my Hal.  The SMS module which was working, suddenly stopped.

When diagnosing the issue, I see this in debug:

SMS Connector for xAP v12
Copyright (C) DBzoo, 2009

br0: address 172.16.10.100
br0: netmask 255.255.255.0
Autoconfig: xAP broadcasts on 172.16.10.255:3639
xAP uid=FF00DD00, source=dbzoo.livebox.sms
Debug level 6
Broadcast socket port 3639 in use
Assuming a hub is active
Socket port 3639 in use
Socket port 3640 in use
Discovered port 3641

Using serial device /dev/ttyUSB0

Serial Tx: AT+CREG?
Serial Rx: àæøæxøx~fxà
initmodem: Waiting 2 secs before retrying
Serial Tx: AT+CREG?
Serial Rx: àxà
initmodem: Waiting 2 secs before retrying
Serial Tx: AT+CREG?
Serial Rx: àæø
initmodem: Waiting 2 secs before retrying
Serial Tx: AT+CREG?
Serial Rx: æxøx
initmodem: Waiting 2 secs before retrying
Serial Tx: AT+CREG?
Serial Rx: àæøæà
initmodem: Waiting 2 secs before retrying
Serial Tx: AT+CREG?
Serial Rx: àxà

I've restarted HaH, restarted phone, delete all messages and reset phone to factory, still no joy.

Any ideas?

Gary

Forums

Hi Derek/Brett,

Ran into another problem today while extending my 1wire sensor 'array'.

I got 2 running no problem, set up my pachube and data started flowing.  Later, I added another and my readings all turned to "?".

To give you some more info...I purchased some stereo, 3.5mm jack extension cables...after checking prices etc it seems you only save a £1 or 2 by making the cables yourself.  I've added a 5m cable for the second sensor split immediately after the livebox using a stero cable splitter like the one in your picture.  One of those splits was then split again using the splitter device sent with the sensors, into that I plugged 1 more sensor and a 10m extension cable terminating at another sensor.

After moving the location of sensor 2(it was in direct sunlight), I then went to check the readings.  All read "?"

XFX msgs report the same.

I have tried to disconnect and revert back to 2.. no effect, I even tried going back to 1...no effect.  Don't think I've shorted anything, the only thing I can think off is the temp of the box?  I know Derek said he has no problems with his but mine is upstairs in the loft(no vents), only a couple of fans running(set by temp sensor) and it's sitting on quite a hot Dell switch.  Temp at the box get's upto about 37c.

Weird how it just 'went' though. 

** Edit **

I should also have added that at "almost" the same time I added 3 more RF modules.  Not the S variety but the W ones.

This seems to have been part of the issue.  Sometime later in the eveinging, with everything being so hot, I had to shift things(one of the fans in the loft) around a bit.  When I removed one of the RF modules(one that's been running for a week or so), the temps(all but one of the 3 connected came back initially, after a reboot, all 3 came back).

So I decided to unpolug one of the new RF modules which has been turning on & off on it's own since I installed it.

I've probably tried to do too much at onse.  Tomorrow, I'll remove all the new RF entries I've put in and try and get the 1wire stuff going.  Then move from there in a more methodical approach.

Forums

It's very hard to get an RS232 data cable for this phone that plugs into the bottom.

Most of the cables use a device that houses the battery and sim and fit into the battery cavity.

I have tried this cable and coul not get it to work.

 

I recommend 6210 or 6310 or 7110.  These all seem to use the same data cable which are available for about £8.

Forums

...any plans to activate this?

Also I think this board has Bluetooth onboard, is it possible to activate this?

 

Just out of interest...

Cheers

Gary

Forums

OK, I'm not getting any connection to /dev/ttyUSB0...but I'm certain it's not HAH.

I ordered some RS232 to USB cables and an RS232 data cable for my nokia 6100.

The first problem I have is that the data cable that has been sent isn't what I ordered, it basically replaces the battery and the sim.  Seems to be for unlocking the phone but definitely doesn't work with HAH, or Nokia Data suite for that matter.

If anyone ineeds a data cable for a Nokia 61**, you're looking for a dual bus(F-Bus/M-Bus auto switching), RS232 cable.  This allows you to send sms.

The second problem I think I have is that my RS232 to USB only works with the supplied driver.  Is this the case for them all?  Is HAH loaded with some generic RS232 to USB cable driver(one size fits all)?  I guess I will have to wait for the correct data cable to arrive and test again.

I ordered these: http://cgi.ebay.co.uk/USB-2-0-RS232-SERIAL-DB9-9-PIN-ADAPTER-CABLE-PDA-…

From this guy: http://stores.ebay.co.uk/First2Save (If link above expired, search for rs232 to usb at his site).

I'll update this post of tests prove cables are OK.