General discussion

Description

Off piste conversations

Complete novice here.

I have recently written an app for my Android phone which sends UDP packets (for another project I'm working on)

Adapting this app what is the best approach to controlling the Livebox. Do I have to write LUA scripts to intercept incoming messages?

What about responses? Forgive me if I am approaching this from the wrong direction.

John

I wanted to start a topic so that everyone tell us what you use HAH for what is/are the main/most common uses of HAH?

I got mine to monitor Solar output and my home electricity consumption with a view to maximising my use of free solar energy by controlling my immersion initially and more going forward.

It would be great to collate a top 10 / 20 list of uses that will inspire new users/members like me to give us something to strive for!

Please respond with you top 10 go for it…….
For a few days now I’ve been monitoring my end of my ‘actual’ end of day FIT meter reading and the end of day PV Output reading so right now I don’t have a lot of data to work with however so far I’m seeing the actual FIT meter KW/h reading shows 10% to 23% more than my PV Solar output recorded on PV Output. I think this is a generally accepted problem as PV Output allow you to add a custom rule to adjust the power amount so there is a way to adjust it however the issue is that it is not out by a fixed amount on poor/cloudy generations days the difference I’ve seen is just under 10% and on a much brighter higher-output generation day I’ve seen a 22.96% difference. I don’t feel that averaging the amount and setting this as a fixed percentage will give me an accurate reading so looking to apply a more complex custom rule.

Assume other HAH users are having this same issue and I wanted to ask how you are dealing with this?

I see from the help on PVOutput.org an example rule where….

‘When power is greater than 1000W, increase by 10W, when power is greater than 1500W, decrease 10W, otherwise decrease it by 5%’

if(power > 1000) power += 10; else if(power > 1500) power -= 10; else power *= 0.95;

Also wondered if there is an easy way for me to work out how I need to adjust mine in view of a lower percentage need when less watts are being generated and a higher percentage with more watts, I have the history in PVOutput.org (and I guess pachube.com although I’m not too sure how to extract legend/history from here) can anyone suggest how I work out/construct my proposed rule?
I've successfully paired an additional Current Cost Transmitter to my Appliance 1 channel and I see this using XFX however HAH doesn’t seem to be transmitting the actual watts of this channel, what am I doing wrong?

xap-header
{
v=12
hop=1
uid=FF00DC0B
class=xAPBSC.event
source=dbzoo.livebox.CurrentCost:sensor.1
}
input.state
{
state=on
}

Does the EDF Eco Manager work with HAH also does anyone know if the normal current cost wireless sensors work as well as the appliance plugs?

Just wondering if anyone has any creative ideas to solve my problem of how I can monitor my home power consumption now I have PV Solar as the reading from my Current Cost is skewed by the Solar generated power being feed back into the grid?

Had my pvoutput.org account working fine from the HAH posted pachube.com data for several days without issue then suddenly after midnight last night it seemed to stop when I first viewed pvoutput.org this morning it said no live data on the account, checked pachube.com and data is there and then at 7:10am live data has started to display again in pvoutput. Has anyone else seen this behaviour before?

One of the things I am most interested in is home security and Home Automation, 

I was surprised to see so little interest in this area. I've searched the forums and found nothing.

To my mind, a home alarm system integrated into the HAH would be a logical and natural thing to do. 

If I break down what a home security system does:

 

  1. Provide contact breakers and PIR's to check if something happens. eg. a door is opened or somebody interacts with an infra red beam.
  2. If the alarm is active then turn a relay on to ring the bell or flash a light. Hopefully turn the alarm off after a certain amount of time to stop the neighbours torching your house to stop the bell ringing at 03:30.
  3. Provide a keypad to set various settings up.

 

This is not that different logically to what the HAH does. It waits for inputs from various devices and based on these inputs, triggers certain other devices to make things happen. 

I am triviliasing some of the details, e.g. tamper proof wiring, setting up of various zones as go/no-go areas but unless I'm missing something there's a lot of common details.

The advantages of HAH is that it can easily bring other things into play as well, e.g. SMS, Twitter, easier control from the Internet, ability to add more components in, to have more sophisticated alarm security, such as turning a web cam on when the alarm is triggered to record events, add more sensors than just contact breakers and PIR.

My personal thoughts would be to create a message based system around HAH. The sensors could be directly managed via the HAH or a small PIC based controller could be made to manage the sensors themselves and communicate via xAP to the HAH. 

I may be mising the point completely but a Home Alarm is not much more than this. It has security via anti-tamper systems, it has batteries for when the power is cut, it has keypads for data entry but at the end of the day, it monitors for events and sets an alarm off most of the time. 

Your thoughts welcomed.

Rob