Other

Description

Other questions about the HAH platform

Forums

Hi all,

my twitter appears to have stopped working. Tried re-authorising (which was successfully) but still no joy.

debug showing URL returned 410 error? Anyone else? Is this a twitter issue?

thanks

Garry

 

EDIT: just read that twitter ApI v1 deprecated june11th. Is this the reason? 

Forums

Hi all,

thinking out loud here due to the annoyance of pachube/cosm rebranding issues.

I would like to have access to charts or varying time scales via mobile devices, this has apparently been removed from xively as far as I can tell.

from the bit of googling I have done today I was wondering if anyone has any thoughts or ideas on the following? I can't see why this isn't possible.

obtain a raspberry pi and install Cacti. See http://n00blab.com/cacti-pi/

txfer the data to cacti as Brett describes in the cacti section of the wiki.

Publish the required charts as a webpage as described here: http://forums.cacti.net/viewtopic.php?f=21&t=42714

 

I would appreciate people's thoughts on this before I spend my dollar!

cheers

Garry

Forums

Does anyone here use either the moved or lobat endpoints with the joggler xAPFlash applet?

having trouble in getting them to display the values, in the pachube tab i have the "key" setup as state as opposed to text, this seems to work fine for cosm - https://cosm.com/feeds/94428

the endpoints are setup as follows

dbzoo.livebox.jeenode:bedroom2.moved

dbzoo.livebox.jeenode:bedroom2.lobat

snippet on my button value for the moved endpoint

        <button NAME="Room2-Moved">
            <gridX>5</gridX>
            <gridY>2</gridY>
            <label>
                <text>R2-PIR</text>
                <fontcolour>0xFFFFFF</fontcolour>
                <offset>-20</offset>
                <fontsize>20</fontsize>           
            </label>
            <bsctext>
                <fontcolour>0xFFFFFF</fontcolour>
            </bsctext>           
            <style>electricity.png</style>           
            <xAP>
                <schema>xAPBSC</schema>
                <uid>FF00D802</uid>
                <source>dbzoo.livebox.jeenode:bedroom2.moved</source>
            </xAP>
            <mode>status</mode>
        </button>

snippet for lobat - note the mode is set to text and the hide is set to state

        <button NAME="Room2-Lobat">
            <gridX>4</gridX>
            <gridY>2</gridY>
            <label>
                <text>R2-PWR</text>
                <fontcolour>0xFFFFFF</fontcolour>
                <offset>-20</offset>
                <fontsize>20</fontsize>           
            </label>
            <bsctext>
                <fontcolour>0xFFFFFF</fontcolour>
            </bsctext>           
            <style>electricity.png</style>           
            <xAP>
                <schema>xAPBSC</schema>
                <uid>*</uid>
                <source>dbzoo.livebox.jeenode:bedroom2.lobat</source>
            </xAP>
            <mode>text</mode>
            <hide>state</hide>
        </button>

Forums

Forgive the Xapflash question but it does really relate to the example in the HAH wiki.

I am using the O2 slider for thermostat setting and get the slider displayed as per the attachment.

I would really like this to not have the volume icons as per the example on the wiki but cannot work out how to do this. any pointers anyone?

thanks,

 

Garry

 

 

Forums

I have just started using Cron with the livebox after struggling with googlecal reliability.

I have used Cron in the past (back in the days of looking after a few VAX VMS machines) and thought I understood the syntax (it's not difficult) or so I thought.

To me this line

00 10 * * 6-7 aliasmsg "thermostat 19.0"

means that an alias message wil be sent to set the thernostat to 19.0 on Saturday and Sunday at 10am

So why did my heating fire up at 19.0 at 10am today, Friday?

Forums

What are others feelings on whether to use googlecal or cron to control events.

I'm trying to use googlecal to control thermostat settings for the heating but I'm having problems getting reliable alias events. I do get them but only a few times a day. I've been trying to see a pattern but not identified one yet.

I know others have had issues previously but looking through the forum posts not much has been talked about since mid 2012, so either the issues are resolved or people have moved on to something else.

My other option is obviously cron events but I've not had much luck there either.

I'm missing something (after reading the wiki and posts many times). If I try bscmsg at the command line I get...

/usr/bin/lua: /usr/share/lua/5.1/pl/lapp.lua:139: attempt to index upvalue 'types' (a nil value)
stack traceback:
        /usr/share/lua/5.1/pl/lapp.lua:139: in function 'add_type'
        /usr/bin/bscmsg:9: in main chunk
        [C]: ?

Instead of...

bscmsg:missing required parameter: t

  Various flags and option types
    -t (string)   xAPBSC Target
    -s (onoff)    xAPBSC State
    -x            xAPBSC Text
    -l            xAPBSC Level

I have got cron enabled but any event I enter into the file produces no results

I have however managed to create a few new endpoints, get them to be cached and read by mote...yeah go me

My current state of control is...
heating 'required' temp controlled from an array with a setting for each hour of the day
Heating 'actual' temp feedback from a roomnode
This works fine and has all winter BUT SWMBO has to rely on me to adjust things

ready and waiting is a 'mote' interface on the iPad with SWMBO friendly boost and thermostat override options, tested and ready to go...
and googlecal set up for 'required' temps during working week and weekend....
but without reliable alias command from googlecal I cannot rely on this


Forums

The Current cost unit has it's limitations.......

Major.. it's not a true power monitor, it's USB based so the unit has to be connected to the HAH and what is the displayed info all about...

 

This unit is Jeenode 'ish' based, has an active forum..........   http://openenergymonitor.org/emon/Modules&nbsp; So intergration should be simple ! ... some months ago I played with a vero board arduino version I logged to via a pc via real time Voltage, Amps, Power, PF, real power etc. ! , just ordered the shield version RFM12B and display.

 

Any thoughts

Forums

Hi All,

Im currently running my CC Envir with the CT Clamp for Electric and it seems to work fairly well despite the 6 second updates, now on to the next phase as it were....

Gas monitoring, i've seen various websites (links below) that talk of modifying an optial sensor with a reed or hall effect switch etc

my question is should i use a CC dev board using one of the spare CC channels importing that data into the HAH/Pachube i can also monitor the data from the CC display

or.... is it possible and better to use a roomnode and some clever scripting?

thanks

Andrew

/content/script-read-gas-pulses-cc-dev-…

http://home.btconnect.com/brettoliver1/Gas_Meter/Gas_Meter.htm

http://jtlog.wordpress.com/2009/05/07/current-cost-gas-meter-monitoring/

http://jtlog.wordpress.com/2009/06/22/my-first-currentcost-development-…

http://john.crouchley.com/blog/archives/345

http://john.crouchley.com/blog/archives/322

http://www.virtualnet.demon.co.uk/#Gas

Forums

Hi all,

im having some issues setting up Pachube with my feed at https://cosm.com/feeds/94428

Does everything below look ok? i noticed the setup for Pachube is different to the wiki and includes the feed column on each datastream line

i guess this needs to be set as per the main feed ID?

obviously the API key is removed for posting this screenshot :)

am i possibly missing the correct setup at the Cosm end?

thanks

 

 

Forums

Just loaded PnP 111 on my Joggler to expand its capability.

Having problems installing iServer, I get the following network issue:

# sh iserver.run

Uncompressing iServer xAP UDP/TCP gateway

Installing iServer to /usr/bin

Creating auto start script in /etc/init.d/boot.d

Starting the iServer

killall: iServer: no process killed

Cleaning up

 

Do I have a portforwarding issue ?