Latest flashin issue

Hi Derek,

Just flashing my 2nd HAH.  Get all the way to replacing the bootloader, no problem.  I then flash the hah firmware, connect the system to my network, restart and watch for the new IP grabbed from DHCP.

The system doesn't seem to pick one up.

I have removed the bluetooth circuit, would that make a difference?

I've tried it in both network sockets still nothing.

 

I get LED 1 quickflash

LED 2 occasional blink.

Member for

16 years 5 months

BoxingOrange

16 years 1 month ago

Have you tried it with the card back in? If it's the only other thing you've done differently I'd try putting it back and see how that goes.

Member for

17 years

admin

16 years 1 month ago

As the MAC address of each HAH will need to be different.  Make sure you only have 1 on the network at a time until you change this via the GUI.  Otherwise DHCP will not hand out a new IP.

Also multiple HAH units on the same subnet isn't really supported well until the next firmware release.  Its doable with what you have but its a little clunky have to change every daemon's Name and UID.

http://code.google.com/p/livebox-hah/issues/detail?id=1