I am using here white with EnviR - this is what one normally gets with it, vs. black with Envi?
In my understanding both are same in essence - USB to RS-232 bridges - with black having four pins connected and white having three (Rx,Tx,GND and no 3V back from bridge?).
I had similar xml issues (in fact RS232 signalling issues) only when tried to "extend" the cable over Cat5 cabling to other side of house.
Thanks for your reply, I'll swap back this evening and try the White USB adaptor again (may be it's faulty !), the black unit hasn't missed a beat for nearly 24hrs, got to say it's the first time using these USB adaptors as my Homeseer server is connected to the CC128 via an RS232 adaptor I made using a MAX232 IC so I've had no logging issues.
Your understanding is the same as mine in that they sould be the same and If I recall they use the FTDI IC's, maybe I'll open up the white unit and take a look.
Due to the High baud rate of the CC128 and EnviR you will get XML dropouts over a long distance, the only way to get around this would be to use an RS232 to ethernet converter.
Member for
15 years 8 monthsBoth should do?
I am using here white with EnviR - this is what one normally gets with it, vs. black with Envi?
In my understanding both are same in essence - USB to RS-232 bridges - with black having four pins connected and white having three (Rx,Tx,GND and no 3V back from bridge?).
I had similar xml issues (in fact RS232 signalling issues) only when tried to "extend" the cable over Cat5 cabling to other side of house.
Regards,
Aivo
Member for
15 years 8 monthsMay be It's faulty
Hi Aivo
Thanks for your reply, I'll swap back this evening and try the White USB adaptor again (may be it's faulty !), the black unit hasn't missed a beat for nearly 24hrs, got to say it's the first time using these USB adaptors as my Homeseer server is connected to the CC128 via an RS232 adaptor I made using a MAX232 IC so I've had no logging issues.
Your understanding is the same as mine in that they sould be the same and If I recall they use the FTDI IC's, maybe I'll open up the white unit and take a look.
Due to the High baud rate of the CC128 and EnviR you will get XML dropouts over a long distance, the only way to get around this would be to use an RS232 to ethernet converter.
Regards
Steve