Since I've added my WH1080 node to the HAH I seem to be getting plugboard crashes due to receiving data from the wrong serial ports.
Sometimes plugboard just stops, other times I do actually get an error like this...
lua: /usr/share/lua/5.1/xap/init.lua:395:
Member for
14 years 5 monthscorrupt data
As you can see from the above post, the data that is being received is a combination of a roomnode and the code from the WH1080
data=OK 2 41 0 19WH1080:2619:2 0 port=/dev/ttyUSB0
The WH1080 is on /dev/ttyUSB2 so why does it appear here?
Member for
15 years 1 monthHi mark
I know nothing, but just a quick observation, why is it using the plugboard.lua from /etc_ro_fs/plugboard rather than the one in /etc/plugboard ?
Member for
14 years 5 monthsHello AllanAll I can say is I
Hello Allan
All I can say is I run xap-plugboard to debug
Here is the latest crash.....
lua: /usr/share/lua/5.1/xap/init.lua:395: /usr/share/lua/5.1/xap/jeenode.lua:51: invalid value (nil) at index 1 in table for 'concat'
xAP Message being processed.
xap-header
{
uid=FF00D500
source=dbzoo.livebox.Serial
hop=1
class=Serial.Comms
v=12
}
serial.received
{
data=<msg><src>CC128-v0.12</src><dsb>01238</dsb><time>19:15:04</time><tmpr>19.8</tmpr><sensor>0</sensor><id>03596</id><type>1</OK 3 18type><ch1><watts>00 0 188 0
port=/dev/ttyUSB0
}
Member for
16 years 10 monthsThe first issue looked like a
The first issue looked like a recurrance of this: issue 30 whcih I fixed in release 308.
http://code.google.com/p/livebox-hah/source/detail?r=436&path=/trunk/us…
Do have a local copy of jeenode.lua in /etc/plugboard ?
The second looks like you are opening the wrong port.
Brett
Member for
14 years 5 monthsI don't have a local copy of
I don't have a local copy of jeenode.lua and only have one HAH
The first one is looking at port 0 but getting data from the WH1080 which is on port 2
The second one is looking at port 0 but getting data from the CC128 which is connected to port 1
On the plus side, plugboard has been running for almost 24hrs now