Hi
Discovered this
http://jeelabs.net/projects/cafe/wiki/Electricity_consumption_meter
and have got it working with a few amendments to roomnode script. Works well.
Hi
Discovered this
http://jeelabs.net/projects/cafe/wiki/Electricity_consumption_meter
and have got it working with a few amendments to roomnode script. Works well.
Member for
14 years 6 monthspersona non grata
Have I been sent to Coventry.
2 recent posts..zero response!
Member for
17 yearsGood work John
Not ignoring you - it's just a quiet time of year for 'things HA'. The sun is shining and outdoors type stuff is on the go.
Nice to see a way to get an accurate elctricity meter reading. I was rather annoyed when my 'old' electricity meter (which had a flashing LED) was replaced by a new one which did not.
Do post some photos of your setup and the work that you did on the Lua script.
Cheers,
Derek.
Member for
14 years 6 monthswhoopee...I have a friend!
Anyway no photos, my temp lash up has a small block of wood with a 6mm ? hole to hold the sensor and this is just taped to the meter.
I attach the sketch. Obviously this will require a PSU to run. Add the JMleccy.lua script and also add 2 lines to the jeenode.lua ie
RoomNodeTwin = require("xap.roomnodetwin").RoomNode
OutputNode = require("xap.outputnode").OutputNode
JMOilNode = require("JMoilnode2").JMOilNode
JMLeccy = require("JMleccy").JMLeccy ######### add this line ###################
IRNode = require("xap.irnode").IRNode
info={
version="2.0", description="JeeNode"
}
local jeemon={
port="/dev/ttyUSB0",
baud=57600,
stop=1,
databits=8,
parity="none",
flow="none"
}
-- Keyed by NODE ID
local nodes = {
[2] = RoomNode{base="dbzoo.livebox.jeenode:livingroom", endpoints={temp=1,light=1,moved=1}, ttl=360},
[4] = RoomNodeTwin{base="dbzoo.livebox.jeenode:hottank", endpoints={temp="water_in",temp2="water_out"}, ttl=360},
[5] = JMOilNode{base="dbzoo.livebox.jeenode:outside", endpoints={oil=1,temp="outside",temp2="boilerroom"}, ttl=360},
[6] = JMLeccy{base="dbzoo.livebox.jeenode:leccy", endpoints={watts=1}, ttl=360} ############## add this line ###########