Your Feeds are still there, and now labeled as “Legacy Feeds”. Full product management means letting you work with products and their feeds, rather than just feeds alone.
So have I lost my historic data?
The old API will still work, but you’ll want to switch to the new https://api.xively.com API as soon as possible in order to get the new security and features we’ve built, and will continue to roll out regularly.
Does this mean we have to change the HAH config or does this require Brett to timker?
Suspect that the 'free lunch' of pachube/cosm is all but over. Not sure that HA types would actually pay for this sort of capability - rrdtool takes some beating. Looking at the reworked site last night ... I might have read it wrong, but 30days of history is a long way short of what we used to enjoy. On-site graphs seem to be poorer too - again I might not be looking at the right part.
Anyway, I can't check more just now. The BA Lounge WiFi firewall blocks access to xively.com
Website:
xively.com:443
Category:
Matched categories:
Web Collaboration
Sites that provide virtual workspace for purposes of collaboration and conferencing, which may include sites that enable authorized access to a computer or network from a remote location
I was planning on this this in my, (cough) spare time, but I got foiled as my PI's ethernet jack I could not get to work. Without ethernet a PI is kind of useless. I either need to figure out why or just buy another.
The PI is very PSU fussy. I tried a few. 1A plus with decent regulation seems to behave (I'm using a usb psu from 'Optimum' - nope never heard of them but it was lying about in the junk pile).
Hi Brett - I know you've been busy on the Current Cost Gas smart - any forecast for an aforementioned xively fix?
I havent even had an email from xively yet on how to access my old followed feeds, of which my own EnviR/Current Cost was one, so the ability for us dump straight to xively would be great.
I made some changes to use the xively API and its working just fine.
Things I'm pondering
rename the [pachube] section in the xap-livebox.ini
rename the xap-pachube service
rename dbzoo.livebox.Pachube xAP source and its manual push service.
If people want a clean break from pachube I can do this but it will mean everybody has some manual edits after upgrading or I need to include an auto upgrade script that run once to rename the [pachube] section in your xap-livebox.ini file to [xively]
I think this is a good idea - a clean switch Ditch Pachube once and for all. Glad I didn't bother when it switched to cosm!
"I made some changes to use the xively API and its working just fine."
Thanks - can I just verify that this is using the new, native Xively API?
I created a new Device in the Xively workbench, obtained the feed id, and new Key, entered these in the HAH fields, restarted etc. I can see that Xap-Pachube is running, but there is no update going to the new Xively feed....
OR
Did you mean your updates were a tidy up, but still legacy (that's working fine).
I would be more than happy to add the instructions for installing on rasp pi if you give me wiki edit rights. I also use the graph export function to make html pages with charts on for viewing outside my network, again happy to document this.
Member for
14 years 5 monthsI got one too. All my feeds
I got one too. All my feeds are now 'legacy' feeds. Guess I'll have to rejig them.
I'd just got used to Cosm :)
Member for
15 years 7 monthsDisaster
Graphing from website is very poor and ios apps stopped working! Not sure we'll ever get back to what we had :(
I'll investigate more later
not happy though
G
EDIT: cannot view charts for more than 6 hours ago and no scale on y axis? My charts are now useless! Gutted.
Member for
14 years 5 monthsIt seems it's only geared for
It seems it's only geared for recent tracking. If you want to go further back you download a csv :(
Member for
14 years 5 monthsAll change....
Your Feeds are still there, and now labeled as “Legacy Feeds”. Full product management means letting you work with products and their feeds, rather than just feeds alone.
So have I lost my historic data?
The old API will still work, but you’ll want to switch to the new https://api.xively.com API as soon as possible in order to get the new security and features we’ve built, and will continue to roll out regularly.
Does this mean we have to change the HAH config or does this require Brett to timker?
Member for
16 years 10 monthsYep I'll need to tinker with
Yep I'll need to tinker with xap-pachube... or should I rename this to xap-WhatTheFuckWillTheyCallThemselvesNextWeek.
Brett
Member for
17 yearsLooks like monetize time
Suspect that the 'free lunch' of pachube/cosm is all but over. Not sure that HA types would actually pay for this sort of capability - rrdtool takes some beating. Looking at the reworked site last night ... I might have read it wrong, but 30days of history is a long way short of what we used to enjoy. On-site graphs seem to be poorer too - again I might not be looking at the right part.
Anyway, I can't check more just now. The BA Lounge WiFi firewall blocks access to xively.com
Derek
Member for
15 years 7 monthsDerek, I think you are
Derek, I think you are right.
Free lunch over, 30 day history but only available via data export. Charting seems to be 6 hours only.
I need to regularly check over the last 24 hours to see when events happened, such as boiler on/off times etc.
might be time I look elsewhere :(
Member for
13 years 11 monthsI vote in built HAH Pachube
I vote in built HAH Pachube :)
Brett & Derek, Something thats possible?
Andrew
Member for
14 years 11 monthssuggest a move to Rasp-pi +
suggest a move to Rasp-pi + openremote with data storage
the PI is awesome (XBMC & Freepbx on my two just want HAH hub) and cheap.
assuming Openremote doesn't drop the designer as free.
Member for
16 years 10 monthsAlex,I was planning on this
Alex,
I was planning on this this in my, (cough) spare time, but I got foiled as my PI's ethernet jack I could not get to work. Without ethernet a PI is kind of useless. I either need to figure out why or just buy another.
Brett
Member for
14 years 11 monthsmaybe useful
Hi Brett
at the risk of teaching egg sucking
Hmm what error are you getting?
The PI is very PSU fussy. I tried a few. 1A plus with decent regulation seems to behave (I'm using a usb psu from 'Optimum' - nope never heard of them but it was lying about in the junk pile).
http://elinux.org/R-Pi_Troubleshooting#Ethernet_connection_is_lost_when_a_USB_device_is_plugged_in
I had the PI misbehave if you plugged anything in on smaller PSUs.
The usb leads about can be a bit wimpy I hear.
and it seems some suffered from soldering issues.
http://raspberrypi.stackexchange.com/questions/4481/why-isnt-my-ethernet-working
I also had to remake the SD card a few times, it didn't always take or had a poor connection.
basically start from scratch with everything
Alex
Member for
17 yearsJack says it so nicely ...
https://twitter.com/jack_kelly/status/334574643887370240
Do checkout his interesting power conservation/HA work at http://jack-kelly.com/
Derek
Member for
15 years 7 months:) :) :)
Am glad to be self sufficient on the charting front!
Cacti is the future! (Slightly ahead of garlic bread!)
;)
Member for
15 years 2 monthsxap-xively?
Hi Brett - I know you've been busy on the Current Cost Gas smart - any forecast for an aforementioned xively fix?
I havent even had an email from xively yet on how to access my old followed feeds, of which my own EnviR/Current Cost was one, so the ability for us dump straight to xively would be great.
Member for
16 years 10 monthsI made some changes to use
I made some changes to use the xively API and its working just fine.
Things I'm pondering
If people want a clean break from pachube I can do this but it will mean everybody has some manual edits after upgrading or I need to include an auto upgrade script that run once to rename the [pachube] section in your xap-livebox.ini file to [xively]
I think this is a good idea - a clean switch Ditch Pachube once and for all. Glad I didn't bother when it switched to cosm!
Brett
Member for
15 years 2 monthsNew API?
"I made some changes to use the xively API and its working just fine."
Thanks - can I just verify that this is using the new, native Xively API?
I created a new Device in the Xively workbench, obtained the feed id, and new Key, entered these in the HAH fields, restarted etc. I can see that Xap-Pachube is running, but there is no update going to the new Xively feed....
OR
Did you mean your updates were a tidy up, but still legacy (that's working fine).
Member for
16 years 10 monthsI mean I need to change a
I mean I need to change a reasonable amount of code, which I've done, and recompile and check this in.
What is strange thou is that my feeds are working but there is no graphs happening on xively ?!
Man they have screwed this over big time. :( Or at least no graphs are appearing for me
My new feed from the changes I just made: https://xively.com/feeds/1970985268
ALSO they increased the size of the feed numbers and until you get my code change you won't be able to enter this LARGER number as it will truncate.
Brett
UPDATE: The graphs are working - stupid browser cache. I've commited my changes there is still no beta pushed yet.
Member for
15 years 2 monthsNew code
" I've commited my changes there is still no beta pushed yet"
Great - your new feed looks ok. Will wait for code release.
Member for
16 years 10 monthsI updated some of the images
I updated some of the images for cacti integration and added a few more sections - just to whet your appetite.
http://www.dbzoo.com/livebox/xap_cacti
Brett
Member for
15 years 7 monthsGood job Brett
I would be more than happy to add the instructions for installing on rasp pi if you give me wiki edit rights. I also use the graph export function to make html pages with charts on for viewing outside my network, again happy to document this.
cheers
Garry.