energyNode

The Current cost unit has it's limitations.......

Major.. it's not a true power monitor, it's USB based so the unit has to be connected to the HAH and what is the displayed info all about...

 

Member for

14 years 5 months

mark_baldwin

13 years 10 months ago

page not found

so we have no way of knowing whether it is better or worse than what we have

Member for

15 years 8 months

steve

13 years 10 months ago

Not sure why the link shows page no found, but you were only two clicks away... follow the link and then click on the modules tab and in the drop down list emonTX shield.

 

The main problem with the Current cost and similiar monitors is they do not record real power usage, they just measure current through a CT, thus the KW or W useage displayed is not a true value of what you are actually using as you also need a voltage measurement to achive this.

There's plenty of info on real power measuring on the web site.

Presently getting my head around lua tables for a WeatherApplet for the fine offset weather sation arduino decoder I have built, but once this done I plan on intergarting this unit and a emonGLCD unit in my HAH in place of the current cost unit another big + it's all RF based.