Release 307

Its been a long time coming

Member for

15 years 10 months

g7pkf

13 years 11 months ago

whats the command to update ?

 

i cannot remember.

Member for

17 years

derek

13 years 11 months ago

Then, telent in and cd to /etc/init.d

Then, ./update will do the job.

Cheers,
Derek.

Member for

14 years 5 months

g4osk

13 years 11 months ago

Trying to get the latest update  but I have no ./update command in my  /etc/init.d directory.

Found update in /etc_ro_fs but running this doesn't work.

So tried this.....

cp /etc_ro_fs/init.d/update /etc/init.d/

cp /etc_ro_fs/init.d/ramdisk /etc/init.d

cd /etc/init.d

./update

Hope this helps!

Regards Keith.

Member for

15 years 7 months

garrydwilms

13 years 11 months ago

Keith,

i think you have over complicated it. Undo the copies you have done and then just type 

/etc/init.d/update

this should do it!

 

Garry

Member for

15 years 11 months

kim

13 years 11 months ago

Changing to 307 my hahnodes stopped working - plugboard not starting - if you start it manually you get

 

 

lua: /etc_ro_fs/plugboard/plugboard.lua:59: attempt to get length of local 'instance' (a number value)

stack traceback:

/etc_ro_fs/plugboard/plugboard.lua:59: in main chunk

[C]: ?

But it could be due to my playing with trying to get RoomNodeTwin working on an Airwick.
So for now could someone tell me how to go back to version 3.06 - I have tried for most of the morning and have to go and paint a cupboard!!
Any help welcome.
Kim 

 

Member for

15 years 11 months

kim

13 years 11 months ago

I found a workaround.  By reversing out the change made in plugboard.lua line 59 and putting the new file in etc/plugboard it all starts working again.

 

My configuration consists of two liveboxes.  The first has a current cost connected to it and does all the cosm uploading for both liveboxes.

The second has the basenode connected to it and is instance 2 (the other being blank).  Mac addresses are different.  It was the second livebox

that I upgraded.

Hope that helps.

Now back to trying to get RoomNodeTwin working with a modified Airwick 

 

Regards

 

Kim