I have used the same login details, I even copy and pasted just to make sure. I've tried the edit calendar function but that doesn't appear to use the stored settings, it is just a link to the google calender page.
Looking at the xap-googlecal source, it seems that Brett has allowed for the specification of the username and password on the command line (as ever it's well engineered stuff). So, retry your interactive test and see how it goes.
Cheers, Derek.
/// Display usage information and exit.
staticvoid usage(char*prog)
{
printf("%s: [options]\n",prog);
printf(" -i, --interface IF Default %s\n", interfaceName);
Most folks will 'never' run the xap-googlecal from the command line.
You don't 'need' to include the username/password on the command line. If you don't, it will lookup the info as specified in your .ini file. However, if you specify this directly ... it does reduce the variables.
So, pop the username/password into the command line invocation & let us know how it goes.
As ever, I'm away from my home setup, so can't do a specific test. However, xap-googlecal is terribly flexible for folks who enjoy a solid internet feed. I wouldn't want anybody to miss the goodness that this can deliver.
I ran a check to make sure that google was still using username/password and I didn't find any problem so I can only assume the issue must be on your end. I did however find one minor wart which I corrected. If you don't have a username and password in your ini file you can't override the settings from the command line.
Member for
16 years 10 monthsWell it kind of looks like
Well it kind of looks like your username and/or password for authenticating isn't setup correctly.
Brett
Member for
15 years 7 monthsWeb GUI edit cal link?
If you click the edit calendar link on the web GUI does it open up and login to your calendar? Might help determine if login details stored correctly?
Member for
14 years 5 monthsI have used the same login
I have used the same login details, I even copy and pasted just to make sure. I've tried the edit calendar function but that doesn't appear to use the stored settings, it is just a link to the google calender page.
Member for
17 yearsTry supplying the username/password on the command line
Looking at the xap-googlecal source, it seems that Brett has allowed for the specification of the username and password on the command line (as ever it's well engineered stuff). So, retry your interactive test and see how it goes.
Cheers,
Derek.
Member for
15 years 7 monthsPossibly
You may be right about the caching of login details. Not much help then, sorry.
Member for
14 years 5 monthsTo Derek...So when I run
To Derek...
So when I run xap-googlecal I need to include the username and password? I assumed it took it from the stored information.
I'll have another go...
Member for
17 yearsIt uses defaults
Most folks will 'never' run the xap-googlecal from the command line.
You don't 'need' to include the username/password on the command line. If you don't, it will lookup the info as specified in your .ini file. However, if you specify this directly ... it does reduce the variables.
So, pop the username/password into the command line invocation & let us know how it goes.
As ever, I'm away from my home setup, so can't do a specific test. However, xap-googlecal is terribly flexible for folks who enjoy a solid internet feed. I wouldn't want anybody to miss the goodness that this can deliver.
Derek.
Member for
14 years 5 monthsI've tried entering the user
I've tried entering the user and pass in the command line but still get the failed to authenticate error.
Could it be something to do with google new 2 step verification process? http://support.google.com/accounts/bin/answer.py?hl=en&answer=185833
Member for
16 years 10 monthsWorks fine for me
Mark,
I ran a check to make sure that google was still using username/password and I didn't find any problem so I can only assume the issue must be on your end. I did however find one minor wart which I corrected. If you don't have a username and password in your ini file you can't override the settings from the command line.
Sample from a success connection
[brett@wombat xap-googlecal]$ ./xap-googlecal -u dbzoo.com@gmail.com -p xxx -d 7
Google Calendar Connector for xAP v12
Copyright (C) DBzoo 2009-2010
[inf][init.c:118:discoverBroadcastNetwork] eth0: address 192.168.1.9
[inf][init.c:130:discoverBroadcastNetwork] eth0: netmask 255.255.255.0
[inf][init.c:137:discoverBroadcastNetwork] Autoconfig: xAP broadcasts on 192.168.1.255:3639
[inf][init.c:74:discoverHub] Acquired broadcast socket, port 3639
[inf][init.c:75:discoverHub] Assuming no local hub is active
[dbg][timeout.c:18:xapAddTimeoutAction] Add timeout. interval=60
[dbg][init.c:222:xapAddSocketListener] socket=4
[inf][googlecal.c:461:main] Connecting to google
[inf][filter.c:34:xapAddFilter] section=xap-header key=target value=dbzoo.livebox.GoogleCal
[inf][filter.c:34:xapAddFilter] section=xap-header key=class value=google.calendar
[inf][filter.c:34:xapAddFilter] section=event key=title value=XAP_FILTER_ANY
[inf][filter.c:34:xapAddFilter] section=event key=start value=XAP_FILTER_ANY
[inf][filter.c:195:xapAddFilterAction] section=event key=start value=XAP_FILTER_ANY data=0
[dbg][timeout.c:18:xapAddTimeoutAction] Add timeout. interval=60
[dbg][timeout.c:18:xapAddTimeoutAction] Add timeout. interval=60
[dbg][googlecal.c:200:googlePeriodEventCheck] Google query params: start-min=2012-06-21T01:20:00Z&start-max=2012-06-21T01:21:00Z&singleevents=true
[inf][tx.c:19:xapSend] send
Member for
17 yearsDitto
I've just replicated the test that Brett conducted. Works fine for me too.
Perhaps try creating a brand new gmail account?
Cheers,
Derek.
Member for
14 years 5 monthsThat sounds like a plan :)
That sounds like a plan :) better to keep things separate anyway.
I'll let you know how I go on.
Member for
14 years 5 monthsNew account seems to have
New account seems to have cured the problem...
Strange :) thanks for the tips, onwards and upwards :)