Alan the pv script you wrote i assume it needs to see a change on the grid before it will "kick in" grid being the feed or draw led (500w on cc dev board) part?
you can then keep an eye on your system and ensure it is running correctly. I know a friend 5 miles away has a system similar to mine i usually do 5% better than him due to the directuiion of my roof.
My neighbour i beat in the summer (actually i slaughter him) and he beats me in autumn/spring as his panels are on a different pitch (better for a lower sun) and his system is 15*270w (4050)panels mine is 16*220 (3520)
Only with three clamps can you tell and it "may" involve rewire.
solar 3kw house 2kw grid 1kw feeding
solar 3 house 4 grid 1 drawing.
i really cannot see how you can do it with 2 clamps?
unless you slowly ramp up the immersion and watch what happens to the grid? just a thought, home easy high power dimmer switch with limit on high so as not to blow it?? thinking out of the box here,
Member for
15 years 10 monthsThink i may know
Alan the pv script you wrote i assume it needs to see a change on the grid before it will "kick in" grid being the feed or draw led (500w on cc dev board) part?
Dean
Member for
15 years 1 monthYes a change of state
Dean
Yes a change of state is required in order for the script to move away from it's zero state when the script is initialised.
(As far as I can remember)
Allan
Just had a quick look in the script it says:
function gridfeed(frame)
-- This function should only be called when there is a change
-- from import to export or vice versa
So the gridfeed function is only called when the CC dev board detects a change of state on the LED on your meter.
PPS
cat /var/log/xap-plugboard.log should show whether the scripts are being started by the plugboard.
Member for
15 years 10 monthsThanks
Its been cracking today, wife has washed ironed and water heated and i have drawn very little off the grid (a unit and a half roughly)
Dean
Member for
15 years 1 monthLucky you
I've generated less than 4Kwh so far today. :-(
Member for
15 years 10 monthsunder 6 yesterday 22+today
And for all you PV's out there sign up to this lot:-
http://pvoutput.org
http://pvoutput.org/list.jsp?id=4806&sid=3791
you can then keep an eye on your system and ensure it is running correctly. I know a friend 5 miles away has a system similar to mine i usually do 5% better than him due to the directuiion of my roof.
My neighbour i beat in the summer (actually i slaughter him) and he beats me in autumn/spring as his panels are on a different pitch (better for a lower sun) and his system is 15*270w (4050)panels mine is 16*220 (3520)
Dean
Member for
15 years 10 monthsAlan
Only with three clamps can you tell and it "may" involve rewire.
solar 3kw house 2kw grid 1kw feeding
solar 3 house 4 grid 1 drawing.
i really cannot see how you can do it with 2 clamps?
unless you slowly ramp up the immersion and watch what happens to the grid? just a thought, home easy high power dimmer switch with limit on high so as not to blow it?? thinking out of the box here,
Dean