Hi guys, after testing the HAH for myself, I'll be installing it into a couple of Villas we own in Cyprus.
The main purpose will be to reduce electricity costs over there while we manage the properties remotely.
I've been trying to research how to configure dropbear which as I understand it allows for X11 tunneling.
I'm pretty sure this would allow me to use SSH to create a tunnel that would allow me to access the HAH from remote.
To make this uber-secure, I should be able to use keys to even remove the need to login using username/pass with a client like putty.
Member for
16 years 5 monthsDropbear SSH
I'm not sure if this is what you're looking for but I think it comes close. I haven't tried it myself but I like the idea :- http://www.nslu2-linux.org/wiki/HowTo/UseDropBearForRemoteAccess Let us know how you get on. What are you controlling remotely? I'm looking for things to do around the house with the HAH and would be interested in learning how best to control appliances or anything else. Karl
Member for
16 years 10 monthsThe keys I believe you are
The keys I believe you are looking for are in /etc/dropbear/
Why not either NAT export the HTTP or SSH server of the HAH? This is what I do when I need to view my HAH from afar. Alternatively I'd setup PPTP/OPENVPN to your router. I run DD-WRT on my linksys router and the PPTP server works well for allowing me remote access into my LAN when I'm away.
I'm not sure where you are going with X11 as the HAH unit does not use any X11 at all.
Brett
Member for
16 years 5 monthsBoxingOrange strikes again..
Thanks BoxingOrange, that help get me on the way.
All I need at the moment is to permanently run dropbear with the -s parameter. I tried altering the file via the symbolic link in /etc/init.d/ssh however this seems to reset following a reboot.
This will deny any logins without an appropriate key.
I have now configured my system to allow for ssh only opened on my Firewall yet still allowing me to use any web ui in my private network from any remote location via ssh tunneling, which was just what I wanted.
Think I may have got my tunnel types mixed up in earlier post.
Member for
16 years 10 monthsModifying /etc/init.d files
To modify the /etc/init.d/ssh file you need to remove the linkage and replace it with the contents from /etc_ro_fs.
# rm /etc/init.d/ssh
# cp /etc_ro_fs/init.d/ssh /etc/init.d/ssh
# vi /etc/init.d/ssh
Then your changes will persist including surviving a firmware auto update.
Brett
Member for
16 years 5 monthsPutty config.
To setup my firewall, I setup port forwarding for SSH to the local IP address of the HAH
(actually I setup outside port 24 forwarding to inside port 22 I find this reduces the amount of connection attempts)
(Of course you then need to setup Putty to point to port 24 instead of 22)
To setup Putty, I did the following:
SSH/Auth
SSH/X11
SSH/Tunnels
Once this session has been saved, I can then make a connection with putty from any remote location, fire up my browser and point it to //localhost:82 which will bring up the Web UI of the Hah.
Any attempt by anyone to login to my ssh port without the key, will result in their connection being dropped.
Hope this helps.
Gary.
Member for
16 years 5 monthsHoles to Control
Hi Gary,
That looks really interesting, and something I'll be giving a go. You just need to chage the second picture in your post, you haven't linked to the correct Flickr X11 picture.
I assume that you managed to make the changes Brett suggested to make the startup script changes permanent.
thanks for sharing,
Karl
Member for
16 years 5 monthsHi Karl,I can't see how to
Hi Karl,
I can't see how to edit the post, so here's the other pic:
Member for
16 years 5 monthsWhich Router
Which router are you using Gary? And is it cable or ADSL? I can't seem to map an external port to a different internal port on any of my routers. I know Brett is using DD-WRT, but I've been told that this only works on cable modems NOT ADSL routers, which is what I have.
Member for
16 years 5 monthspfSense
Hi Karl,
I have a modem bridging my adsl connection through to my firewall which is an old PC running pfSense.
The different port thing isn't really needed, I just find it reduces the number of people trying to hack in.
The won't be able to get in anyway if they're not trying to connect with your private key. As soon as they try to use a username, it should kick them off.
Cheers
Gary