You can supply your own kloned.conf configuration file and startup the webserver like this 'kloned -c /path/to/yours/kloned.conf' however you would also have to
Come up with the correct kloned.conf configuration based on the current source code
Adjust the startup script to supply this additional configuration parameter
This is all in theory as I've never actually done an override outside of the source distribution. It might be possible - but basicically its not trival at this point. Perhaps this is something can be investigation. IF an external configuration file is present this would be used in preference to its compiled in INTERNAL configuration file. File a bug so this idea doesn't get forgotten - http://code.google.com/p/livebox-hah/issues/list
I understand what you mean, but its not always possible.
My previous router allowed that sort of configuration, but my current, ISP supplied, router only permits specific ports to be routed to the same port on a configurable IP address, ie the address is configurable but the swopping of the port is not
Allowing a different port is currently being tested, along with some other requested enhancements. You can always look at the issues list to see where things are in the development lifecycle, http://code.google.com/p/livebox-hah/issues/list.
I requested the 1 wire sensor hysteresis and adjustment. I am now Beta testing it, but i will add this is not the sort of beta where it crashes every 2 minutes it has been rock solid (and works) for a while now (he says crossing his fingers)
Can you point me in the direction of a wiki, or can you do a little instructions menu of how to get access to a remote HAH..... I can see my own little intra-net with its two HAH, but I'd like to be able to control one of the hubs from a remote location....can you assist?
I've got a Sky Router (re-badged D-Link) with sky software - very basic - I've found I can set up an incoming port to pass through the router firewall, but no pin-hole....I'll try again later....
Member for
16 years 10 monthsNot easily
You can supply your own kloned.conf configuration file and startup the webserver like this 'kloned -c /path/to/yours/kloned.conf' however you would also have to
This is all in theory as I've never actually done an override outside of the source distribution. It might be possible - but basicically its not trival at this point. Perhaps this is something can be investigation. IF an external configuration file is present this would be used in preference to its compiled in INTERNAL configuration file. File a bug so this idea doesn't get forgotten - http://code.google.com/p/livebox-hah/issues/list
Brett
Member for
15 years 10 monthswhy?
if its so you can access the hah remotely why not just do a pinhole port redirect?
eg PUBLICIP:8080----TRANSLATES TO------HAHINTERNAL_IP:80
This is what i do to get remote access to my hah.
Member for
16 years 5 monthsNot always possible
I understand what you mean, but its not always possible.
My previous router allowed that sort of configuration, but my current, ISP supplied, router only permits specific ports to be routed to the same port on a configurable IP address, ie the address is configurable but the swopping of the port is not
kevin9
Member for
16 years 5 monthsIn Beta
Allowing a different port is currently being tested, along with some other requested enhancements. You can always look at the issues list to see where things are in the development lifecycle, http://code.google.com/p/livebox-hah/issues/list.
Member for
15 years 10 monthsI can vouch for there being
A very commited development team.
I requested the 1 wire sensor hysteresis and adjustment. I am now Beta testing it, but i will add this is not the sort of beta where it crashes every 2 minutes it has been rock solid (and works) for a while now (he says crossing his fingers)
Dean
Member for
15 years 3 monthsCan you point me....
Hi Dean
Can you point me in the direction of a wiki, or can you do a little instructions menu of how to get access to a remote HAH..... I can see my own little intra-net with its two HAH, but I'd like to be able to control one of the hubs from a remote location....can you assist?
Cheers
EJ
Member for
15 years 10 monthssort of
Firstly you need to know the external ip of your router (this may change) then you need to know if your router is capable of doing port redirection.
HAH internal ip=192.168.1.10
external ip of router = 93.XXX.XXX.1 (example)
you set up a port redirect or pinhole so 93.XXX.XXX.1 port 8080 translates to 192.168.1.10:80
so if you are "away" from home you would put in your browser 93.XXX.XXX.1:8080 and get the web of your HAH (password your HAH webpages)
It really depends on your router as to how you set this up.
if you have a common router i will lay odds its documented or mentioned somewhere?
what router do you have?
Dean
P.S as for changing HAH port never tried the above is "the easy way" changing webport on hah is only reqd if you have a "fussy router"
Member for
15 years 3 monthsMany Thanks..
for the pointer...
I've got a Sky Router (re-badged D-Link) with sky software - very basic - I've found I can set up an incoming port to pass through the router firewall, but no pin-hole....I'll try again later....
Cheers
EJ
Member for
15 years 10 monthsPretty sure
Your going to have to do it the hard way.
change port on HAH to soemthing and pinhole router.
Sky are a pain for "locking" down the network.
Sorry i doubt i can help much more :(
Dean