What do I need

Hi all

I want to investigate modifying the sketches on the Jeenode. Can someone point me at a programmer that I need? or can I user the HAH built in programming feature?

My goal is to attempt to make my own simple weather station and ultimately to also control greenhouse watering.

Many thanks

Member for

16 years 10 months

brett

14 years 9 months ago

If the AVR already has a bootloader on the chip, and MOST do, then you don't need any programmer at all.  The Jeenode can be reprogrammed directly from your PC via its USB cable.

Brett

Member for

16 years 4 months

Alanmh

14 years 9 months ago

I think I remember from a previous thread, that the HAHNodes do not have bootloaders.

Member for

16 years 10 months

brett

14 years 9 months ago

The HAH AVR has no bootloader (by default), the HAHnode's ALWAYS have a bootloader by default.  Perhasp you got these two confused?

Brett

Member for

16 years 4 months

Alanmh

14 years 9 months ago

I did, well not so much confused as mis remembered.

Thanks for the clarity

Member for

17 years

derek

14 years 9 months ago

The HAHnodes have been in 'beta test' for a while now. Some folks will have early release versions of the 328 chip that had no bootloader onboard. These can only be re-programmed via ISP.