Hi Derek,
Recieved the Long range external antenna from the shop and I was wondering about the best way of 'tweaking' the board to accomodate the connector, alternatively I would prefer to mount the connector to the shell of the Livebox but in doing so I would need to extend the connection from the RF board to the socket - is this advisable?
Thanks
David
Member for
17 yearsRF Pigtail
Hi David,
The connector that is supplied with the external antenna is designed to fit directly onto the RF module board (I simply snipped off three of the four mounting pegs and enlarged the 'ant' connection hole on the PCB to fit the middle pin on the RF connector. However, i run my HAH 'case off'. This style of fitting isn't ideal if you intend to close the case again.
What you need is a 'pigtail' conncetor. This comes pre-wired and heatshrunk (at the SMA end) and will mount onto a suitably placed hole in the side of the HAH enclosure. Just ensure that there is both a ground connection and the 'ant' connection on the pigtail.
So, I'll create another item on the shop for this 'pigtail' and will send one on to you by way of thanks for pointing this out.
Derek
Member for
15 years 11 monthsRF Pigtail
Thanks Derek,
This looks just the job.
Re the ground connection - looking at the picture of the RF Transmitter Module at the top left is GND - I presume this would be the location to connect the ground (shield) wire?
David
Member for
17 yearsRF Pigtail
Yes, this Gnd point is just fine. You might have to strip back the pigtail shield wire a bit ... I'll pop in a short length of heatshrink to help with attaching this without any shorting.
Derek.
Member for
15 years 11 monthsRF Pigtail
Member for
17 yearsNice work
The pigtail part looks to be a good fit. If it's OK with you, I'll include your image on the wiki as an exemplar of how to fit the antenna connector.
I'll chat with Brett re the 'more than one item' issue that you are seeing.
Cheers,
Derek.
Member for
15 years 11 monthsimage use
More than happy to oblige with the use of the picture as you see fit.