Just been reading through the IOS6 features which launches on 19th Sept and noticed that SIRI will now send tweets via voice command.
Assuming this works OK then this feature easily opens the door to voice control on the HAH.
Simply speaking "tweet House lamps on" or "tweet house thermostat 19" should in theory produce an alias message that can be interpreted by a modified alias lua script.
I'm gonna make it my next project when IOS6 ships. I'll keep you posted!.
Garry
Member for
14 years 5 monthssounds interesting, keep us
sounds interesting, keep us posted :)
Member for
15 years 1 monthDefinitely works. A minor
Definitely works. A minor problem is that when constructing the tweet it capitalises the first letter of the first word. This can be overcome by adding another function to the alias handler applet to deal with it.
Cool trick though!
Member for
15 years 10 monthsAny update?
wife would love this-iphone 5 and ipad 3, i get all her cast offs so only have ipad 1 and ipad 1 :(
Member for
15 years 1 monthWhat kind of update?
It's definitely working; saying "tweet thermostat 18.7" to SIRI produces an alias message which resets my CH thermostat. "tweet boost on" sets the boost setting to on, I've even set up a "tweet coffee on" which switches on RF 3 which has the coffee machine attached!
One of the limitations of twitter is that you can't tweet the same message over and over again, so the thermostat is not a problem because you can just change it in .1 of a degree increments. coffee machines and boost functions are slightly different. I'm not sure what the interval parameters are for repeating the same tweet but it is certainly hours and possibly more than a day. So lights on and lights off could probably only be done once a day each. But I'm sure people can come up with novel names for the same thing in the alias handler.
Member for
15 years 7 monthsRepeating tweets
Allan, I can confirm it works for me too however the HAH deletes the tweet for me once actioned so I can repeat the same tweet as often as I like!
is this not happening for you?
Garry
Member for
15 years 1 monthNot AFAIK
I'm really new to twitter (just set it up to do this) but the tweet which was sent this morning is still there on my twitter page. Perhaps there's something I've missed in the set up. I'll have a look.
Member for
15 years 7 monthsCommand prefix?
I bet this is to do with the command prefix setting in the twitter config page.
Is yours left blank??
this is there so that only tweets starting with the command prefix are actioned ( and I guess deleted) if its blank I assume all tweets are actioned but maybe not deleted.
It depends what you want most. Adding a command prefix such as "House" would mean that you now need to tweet " House thermostat 17.9" one word longer but this would allow the tweet to be deleted and also get round your capitalisation issue as well
i guess it up to you what matters most
garry
Member for
15 years 1 monthSounds likely, I'll
Sounds likely, I'll experiment in the next few days.
Allan
Member for
15 years 10 monthsNot working :(
Totally new to twitter-set up for just HAH control for wife, so she can overide heating and turn lights on/off remotely.
have set House as command prefix authorized with twitter but no tweets are actioned?
if i tweet "House conservatory on" nothing happens but it should switch conservatory lights on?
all tweets stay in my twitter bit?
how do i debug?
Dean
Member for
15 years 10 monthsOk ran up XFX
And it is picking up twitter
xap-header
{
v=12
hop=1
uid=FF00D900
class=alias
source=dbzoo.livebox.Twitter
}
command
{
text=printers off
}
Butit does nowt here is an rf command send from Joggler:-
xap-header
{
v=12
hop=1
uid=FF00DBA0
class=xAPBSC.event
source=dbzoo.livebox.Controller:rf.1
}
output.state
{
state=on
displaytext=printers on
}
is there some sort of aliasing i am missing?
Dean
Member for
15 years 1 monthAlias
Dean
Your alias handler needs to convert the command to the appropriate message to target the device.
I assume that what you are saying is that using "printer off" as an alias message works OK?
If you type aliasmsg "printers on" at the command prompt does it work correctly?
Allan
Member for
15 years 10 monthsNo it doesnt :(
This is my AliasApplet.lua (lokks gibberish to me :) )
--[[
Alias interpreter
Use to perform actions based on xAP alias class messages emitted by
both xap-twitter and xap-googlecal
--]]
module(...,package.seeall)
require("xap")
require("string")
rex = require("rex_posix")
info={
version="1.0", description="Alias Interpreter"
}
pat={
[rex.new("(relay|rf) ([1-9]) (on|off)")]=function(m) rfRelayCmd(m) end,
[rex.new("tweet (.*)")]=function(m) tweet(unpack(m)) end
}
function sendBscCmd(target,body)
xap.sendShort(string.format([[xap-header
{
target=%s
class=xAPBSC.cmd
}
output.state.1
{
id=*
%s
}]], target, body))
end
function tweet(msg)
sendBscCmd("dbzoo.livebox.Twitter","text="..msg)
end
function rfRelayCmd(t)
local addr1,addr2,state = unpack(t)
sendBscCmd(string.format("dbzoo.livebox.Controller:%s.%s",addr1,addr2),"state="..state)
end
function aliasEngine(frame)
local alias = frame:getValue("command","text")
for r,f in pairs(pat) do
if type(r) == "string" then
if r == alias then
f()
end
else
p={r:match(alias)}
if #p > 0 then
f(p)
end
end
end
end
function init()
local f = xap.Filter()
f:add("xap-header","class","alias")
f:add("command","text",xap.FILTER_ANY)
f:callback(aliasEngine)
end
Member for
15 years 1 monthOK
OK your alias handler doesn't handle a command called conservatory or whatever.
You need a handler routine and an setup expression to make it work
[rex.new("conservatory (.*)")]=function(m) conservatory(unpack(m)) end,
in your setup and
function conservatory(msg)
sendBscCmd("dbzoo.livebox.Controller:rf.3","state="..msg)
end
in the body
Then when you issue a
aliasmsg "conservatory on" at the command line it should switch rf 3 on or off
Allan
Member for
15 years 10 monthsthank you
That sorted it :)
now to train wife :)
Member for
15 years 1 monthTrain the wife
Phew! Good luck mate. Afraid I can't help you with that!